Bedienungsanleitung Casio PL-40R (Seite 22 von 34) (Englisch)

466869

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Basic Operations

E-20

With split you can assign two different tones (a main tone and

a split tone) to either end of the keyboard, which lets you play

one tone with your left hand and another tone with your right

hand.

1. Select the main tone.

2. Press the SPLIT button.

This causes the indicator lamp of the button to

light.

The current split tone name appears on the

display. You can use the TONE buttons to change

the split tone if you want.

3. Select the split tone.

4. Now try playing something on the keyboard.

The lower range (left side) of the keyboard is

assigned the split tone, while the upper range

(right side) is assigned the main tone.

The location on the keyboard where the

changeover between the two tones occurs is

called the split point. See “To change the location

of the split point” on this page for details on

changing the location of the split point.

5. Press the SPLIT button again to unsplit the

keyboard and return it to normal.

This causes the indicator lamp of the button to go

out.

Split is disabled during demo tune play and in the Music

Library Mode (while Music Library Mode lamp is lit).

Split is achieved by sounding Upper1 and Lower1 of mixer

Group A. This means you can use the mixer to change the

volume balance and stereo pan position parameters for

both the main tone and split tone. See “Using the Mixer” on

page E-46 for details.

While holding down the SPLIT button, press the keyboard

key where you want the lowest note (the leftmost key) of the

upper range (right side range) to be.

No sound is produced when the keys are pressed.

You can use layer and split together to create a layered/split

keyboard. When you use layer and split in combination, the

high range of the keyboard is assigned two tones (main tone

+ layered tone), and the low range two tones (split tone +

layered/split tone).

1. Select the main tone, layered tone, split tone,

and layered/split tone.

Use the mixer to select the tones, following the

procedure under “Changing the Parameters of a

Part” on page E-47. The main tone is Upper1, the

layered tone is Upper2, the split tone is Lower1,

and the layered/split tone is Lower2.

2. Turn on both layer and split to layer/split the

keyboard.

Press the LAYER/(GROUP A/B) button once to

turn on layer.

Press the SPLIT button to turn on split.

This causes the indicator lamps of both the

buttons to light.

The layered/split tone name appears on the

display. You can change the layered/split tone if

you want.

3. Now try playing something on the keyboard.

4. Press the LAYER/(GROUP A/B) button and the

SPLIT button again to unlayer/unsplit the

keyboard and return it to normal.

Using Split

To split the keyboard

To change the location of the split point

Using Layer and Split Together

To layer/split the keyboard

426-E-022A

PL40NE01-1.book 20 ページ２００２年７月２３日　火曜日　午後６時５２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PL-40R Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PL-40R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info