Bedienungsanleitung Casio PX-3 (Seite 32 von 70) (Englisch)

466891

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

E-30

Editing Zone Parameters

This section explains the meaning of each zone

parameter, and provides information about their

setting ranges and initial default values.

•In this section, each parameter is preceded by a

number and a letter, like “1-A”. This indicates the

common menu page number (1) and the

PARAMETER SELECTOR button you need to press

to select it (A).

•In this section, the name of each zone parameter is

followed by and/or .

•The values following the description of a parameter

are its setting range. The initial default setting is

indicated by an asterisk (*).

Mixer Settings

Adjusts the volume level. 0 is mute, 127

is maximum volume.

0 to 127*

Adjusts the pan position. 0 specifies a

center pan position, a negative value

shifts it to the left, and a positive value shifts it to the

right.

–64 to 0* to +63

Shifts the pitch upwards or downwards

in octave steps. Changing this setting

also shifts the note number sent to an external MIDI

device.

–2 to 0* to +2

MIDI Settings

Specifies the MIDI channel used by each zone

when sending MIDI data.

1 to 16 (*UPPER1:1, UPPER2:2, LOWER1:3,

LOWER 2: 4)

Specifies the value of the bank MSB that is

appended when sending a program change

to an external destination with operation 2-D.

0* to 127

Specifies the value of the bank LSB that is

appended when sending a program change

to an external destination with operation 2-D.

0* to 127

Specifies the program change number sent to

an external destination. Any time this value

is changed, the corresponding numbered program

change is sent to an external destination (without

affecting the internal sound source).

0* to 127

DSP Settings

Selects tremolo, rotary, or some other DSP

type. The DSP type is indicated by “ton”

(which is the initial default for each tone) or a number

from 1 to 64. Any time the  (EDIT w, q) buttons

are used to switch the number, the DSP type name that

corresponds to the current number will appear on the

display.

The parameters displayed in 3-B depend on the DSP

type selected here.

In accordance with the DSP type selected in

3-A, displays the name of the parameters

whose settings can be configured. When there are

multiple parameters, you can use the  (EDIT w,

q) buttons to scroll through them. Perform the

operation under 3-C to change the setting of a

parameter.

Zone Parameter Settings

indicates a setting that applies to internal

sound source control.

indicates a setting that applies to external

MIDI device control.

■1-A Volume (Vol)

■1-B Pan

■1-C Octave Shift (Oct)

INT

EXT

INT

EXT

INT / EXT

■2-A MIDI Out Channel (MidCh)

■2-B Bank MSB (BnkMS)

■2-C Bank LSB (BnkLS)

■2-D Program Change (Prog)

■3-A DSP Type (DSP)

■3-B DSP Parameter (Parameter)

EXT

INT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-3 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info