Bedienungsanleitung Casio PX-3 (Seite 33 von 70) (Englisch)

466891

Zoom out

Zoom in

Vorherige Seite

1/70

Nächste Seite

English

Editing Zone Parameters

E-31

This item is used to change the setting

of the parameter displayed in 3-B.

IMPORTANT!

• For details on information about parameter names

and the settings and initial defaults for each

parameter under each DSP type number and type

name, see “DSP Effect List” (page E-60) and “DSP

Algorithm List” (page E-61).

Editing Tones

Changes the pitch in semitone steps.

–12 to 0* to +12 semitones

Use this item to adjust the pitch in cent

steps (1 cent = 1/100 semitone).

–99 to 0* to +99 cents

Specifies whether or not portamento

should be applied to each zone when

the assignable button to which portamento is assigned

is pressed.

OFF*, ON

Specifies the pitch change time when

portamento is turned on in 4-C. A

smaller number specifies a shorter time, while a larger

number specifies a longer time. Portamento is not

applied when this setting is 0.

0* to 127

Attack time is the time it takes for the

sound to reach full volume when a note

is played. This item makes relative adjustments to the

default attack time (0) of each tone. A larger positive

value lengthens the attack time, which produces a

slower attack. A larger negative absolute value

shortens the attack time, which produces a faster

attack.

–64 to 0* to +63

Release time is the time it takes for the

sound to fade when a note ends.

Adjustment is relative from the initial default setting

(0) of each tone. A larger negative absolute value

shortens the release time, while a larger positive value

lengthens the release time.

–64 to 0* to +63

This item is for adjusting how the cut-

off filter application is applied to a tone.

The cut-off filter is a tone adjustment filter that

eliminates (cuts off) all components over a given

frequency from within a tone’s overtone components.

Adjustment is relative from the initial default setting

(0) of each tone.

A larger negative absolute value produces a softer

sound, while a larger positive absolute value produces

a harder, brighter sound.

–64 to 0* to +63

This item is for adjusting how much the

sound volume and timbre changes, and how

it changes in accordance with keyboard pressure.

Setting a larger absolute value causes relatively large

change in sound volume and timbre in response to

changes in key pressure. If this setting is 0, sound

volume and timbre remain constant regardless of key

pressure.

If the setting is positive, a larger value results in harder

notes when stronger pressure is applied, and softer

notes when lighter pressure is applied. If the setting is

negative, a larger value results in softer notes when

stronger pressure is applied, and harder notes when

lighter pressure is applied. The change in sound

volume and timbre depends on the tone.

–64 to 0 to +63*

This item is for adjusting the speed of

vibrato applied to notes. A larger

negative absolute value decreases the speed, while a

larger positive value increases the speed.

–64 to 0* to +63

■3-C Parameter Value (Value)

■4-A Coarse Tune (CrsTu)

■4-B Fine Tune (FinTu)

■4-C Portamento ON/OFF (Porta)

■4-D Portamento Time (PTime)

■5-A Attack Time (Atack)

INT / EXT

■5-B Release Time (Relas)

■5-C Filter Cutoff (Flter)

■5-D Touch Sense (Sense)

■6-A Vibrato Rate (VbRat)

INT / EXT

INT

INT / EXT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-3 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio PX-3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info