Bedienungsanleitung Casio PX-575R (Seite 59 von 100) (Englisch)

586832

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

E-57

Song Memory Function

To record to Tracks 2 through 6 using

real-time recording

You can record to Tracks 2 through 6 while playing back what

you originally recorded on Track 1 and any other tracks that

are already recorded.

Press the SONG MEMORY button twice to enter

record standby, and then use the number buttons

to select a song number (0 to 4).

• The song number you select should be the one where

you previously input Track 1.

Use the SONG MEMORY TRACK buttons to select

the track you want to record to (2 through 6).

• While the digital piano is in record standby, the

display shows the level meters for channels 11

through 16, so you can check which tracks have

already been recorded. See “Level Meter Contents

During Record/Edit Standby” on page E-58 for

details.

IMPORTANT!

• The length of the ending depends on the rhythm you

are using. Check the length of the pattern you are using

and set the length of the chord accordingly in step 6.

Making the chord too short in step 6 can result in the

ending pattern being cut off.

To step record chords without rhythm

Skip step 4. The specified chord of the length specified by

the number buttons is recorded. A rest can be specified here,

so an original chord pattern can be created.

To add chord accompaniment part way through rhythm

play

In place of step 4 at the start of the recording, press

VARIATION/FILL-IN 1 or VARIATION/FILL-IN 2 button

and input rests. Then in step 5, input the chords. Only rhythm

is played where you input the rests, and then chord play starts

after the rests.

Recording Multiple Tracks

Track 1 of the digital piano’s song memory records Auto

Accompaniment and keyboard play. In addition, there are

five other melody tracks that you can use to record melody

parts only. You can record different tones to the melody tracks

and build a full ensemble of instruments for your recordings.

The procedure you use for recording to Tracks 2 through 6 is

identical to the one you use when recording to Track 1.

Make the following settings.

• Tone number

• Tempo

Press the START/STOP button to start recording.

• At this time, the contents of any tracks that are already

recorded start to play back.

• The pedal and pitch bend operations are also

recorded.

Use the keyboard to play what you want to record

the track you selected.

Press the START/STOP button to end recording

when you are finished.

Track Contents After Real-time

Recording

In addition to keyboard notes, the following data is also

recorded to the selected track during real-time recording. This

data is applied whenever the track is played back.

• Tone number

• Pedal operations

The following data is recorded in the header whenever you

start a recording of a track.

• Mixer settings of other tracks

• Effect type

• Accompaniment volume

• Reverb Level

• Chorus Level

• DSP Hold On/Off

• Mixer Hold On/Off

• Pitch bend wheel operation

• Pitch bend range

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-575R Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info