Bedienungsanleitung Casio PX-575R (Seite 60 von 100) (Englisch)

586832

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

E-58

Song Memory Function

To record to Tracks 2 through 6 using

step recording

This procedure describes how to input notes one-by-one,

specifying each note’s pitch and length.

Press the SONG MEMORY button three times to

enter real-time record standby, and then use the

number buttons to select a song number (0 to 4).

• The song number you select should be the one where

you previously input Track 1.

Use the SONG MEMORY TRACK buttons to select

the track you want to record to (2 through 6).

Example: Select Track 2.

Specify a tone number.

• Pressing a TONE button or the DRAWBAR ORGAN

button displays the tone number and name on the

display. You can then use the number buttons, or the

[+] (increase) and [–] (decrease) buttons to change the

tone.

• After changing the tone number, press any keyboard

key to clear the tone number and name screen, and

return to the note input screen.

Use the keyboard keys to input notes, or the [0]

button to input rests.

• At this time, the display shows the keyboard pressure

(velocity). Use the [+] (increase) and [–] (decrease)

buttons to change the velocity.

• You can also input a chord.

Use the number buttons to input the length of the

note or rest (page E-56).

Repeat steps 4 and 5 to input more notes.

Press the START/STOP button to end recording

when you are finished.

Flash

StS

ceRe

NOTE

• Use the procedure under “Correcting Mistakes While

Step Recording” on page E-59 to correct input mistakes

you make during step recording.

• You can add on to a track that already contains recorded

data by selecting that track in step 2 of the above

procedure. Doing so automatically locates the step

recording start point at the first beat immediately

following the previously recorded data.

• Whenever you are recording to Tracks 2 through 6, the

entire keyboard functions as a melody keyboard,

regardless of the current MODE button setting.

• When playing back data recorded with Advanced Tones

at the beginning of multiple tracks, the digital piano uses

the DSP type of the Advanced Tone that is recorded in

the track with the largest track number.

• When playing back a track that was recorded with an

Advanced Tone selected, they may be a slight delay

before the first note of the track sounds. If this happens,

try to insert a very short rest at the beginning of the

track.

Track Contents After Step Recording

In addition to notes and rests, the following data is also

recorded to the track during step recording. This data is

applied whenever the track is played back.

• Tone number

Level Meter Contents During Record/

Edit Standby

Channels 11 through 16 correspond to Tracks 1 through 6.

Whenever the digital piano is in record or edit (page E-60)

standby, the level meter display shows which tracks already

contain recorded data and which are still empty. Tracks with

four lit segments already contained recorded data, while

tracks with one lit segment are not yet recorded.

Recorded track

Not recorded track

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio PX-575R Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info