Bedienungsanleitung Casio QV-70 (Seite 2 von 18) (Englisch)

585958

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

General Precautions

Be sure to observe the following important precautions whenever us-

ing the QV-70. All references in this manual to “this camera” and “the

camera” refer to the CASIO QV-70 Digital Camera.

• Never try to take pictures or use the built-in display while operating

a motor vehicle or while walking. Doing so creates the danger of

serious accident.

• Never try to open the case of the camera or attempt your own re-

pairs. High-voltage internal components create the risk of electrical

shock when exposed. Always leave maintenance and repair work

up to authorized CASIO service providers.

• Keep the camera away from water and other liquids, and never let it

get wet. Moisture creates the danger of fire and electrical shock.

Never use the camera outdoors in the rain or snow, at the seashore

or beach, in the bathroom, etc.

• Should foreign matter or water ever get into the unit, immediately

turn power off, unplug the AC adaptor from the power outlet, and

contact your dealer or nearest CASIO service provider. Using the

unit under these conditions creates the danger of fire and electrical

shock.

• Should you ever notice smoke or a strange odor coming out of the

unit, immediately turn power off and unplug the AC adaptor from the

power outlet. Using the unit under these conditions creates the dan-

ger of fire and electrical shock. After making sure there is no more

smoke coming from the unit, take it to your nearest CASIO service

provider for repair. Never attempt your own maintenance.

• If the unit’s case should ever become cracked due to dropping it or

otherwise subjecting it to rough treatment, immediately turn power

off, unplug the AC adaptor from the power outlet, and contact your

nearest CASIO service provider.

• Never use the unit inside of an air craft or in any other areas where

its use is prohibited. Doing so can result in an accident.

Precautions

LCD Digital Camera

• Physical damage and malfunction of this unit can cause the image

data stored in its memory to be deleted. Be sure to always keep

backup copies of data by transferring them to personal computer

memory.

• Never open the battery compartment cover, disconnect the AC

adaptor from the camera or unplug it from the wall socket while the

“WAIT” message is on the LCD. Doing so will not only make storage

of the current image impossible, it can also corrupt other image data

already stored in camera memory.

MEMORY ERROR message

Any of the following can cause data stored in the camera’s memory to

become corrupted.

• Removal of batteries or disconnection of the AC adaptor during a

record or data communication operation

• Disconnection of the connecting cable during data communication

• Continued use while battery power is low

• Other incorrect operation

In each of the above cases, further operation of the camera becomes

impossible and one of the messages shown below eventually ap-

pears to inform you of the problem. See “Messages” on page 67 for

details on what you should do when one of these messages appears.

MEMORY ERROR

CONSULT

THE OWNER'S

MANUAL!

MEMORY ERROR

CONSULT

THE OWNER'S

MANUAL!

Memory Error #2 Memory Error #3Memory Error #1

Contact your dealer or an authorized

CASIO service provider.

See page 67

MEMORY ERROR

YES

NO CALL TECH

SUPPORT!

Operating conditions

• This camera is designed for use in temperatures ranging from 0°C

to 40°C (32°F to 104°F).

• Do not use or keep the camera in the following areas.

— In areas subject to direct sunlight

— In areas subject to high humidity or dust

— Near air conditioners, heaters, or other areas subject to tem-

perature extremes

— Inside of a closed vehicle, especially one parked in the sun

— In areas subject to strong vibration

Condensation

• When you bring the camera indoors on a cold day or otherwise ex-

pose it to a sudden change of temperature, there is the possibility

that condensation can form on the exterior or on interior compo-

nents. Condensation can cause malfunction of the camera, so you

should avoid exposing it to conditions that might cause condensa-

tion.

• To keep condensation from forming, place the camera into a plastic

bag before moving it into a location that is much warmer or colder

than your current location. Leave it in the plastic bag until the air

inside the bag has a chance to reach the same temperature as the

new location. If condensation does form, remove the batteries from

the camera and leave the battery compartment cover open for a few

hours.

Precautions

LCD Digital Camera

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF

THIS UNIT IN THE U.S.A. (not applicable to other areas).

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

NOTICE

This equipment has been tested and found to comply with the lim-

its for a Class B peripheral, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency en-

ergy and, if not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful inter-

ference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following mea-

sures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

FCC WARNING

Changes or modifications not expressly approved by the party re-

sponsible for compliance could void the user's authority to operate

the equipment.

Properly shielded cables with ferrite core must be used for con-

nection to host computer and/or peripherals in order to meet FCC

emission limits.

THE SPECIAL VIDEO CABLE THAT COMES WITH THE CAMERA ----- THE CAMERA TO A VIDEO IN TERMINAL OF A COMPUTER

THE SPECIAL CONNECTION CABLE THAT COMES WITH QV-Link SOFTWARE ----- THE CAMERA TO A PROPER TERMINAL OF A COMPUTER

Casio QV-70 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info