Bedienungsanleitung Casio QV-70 (Seite 11 von 18) (Englisch)

585958

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Playing Back Images

• Pressing [–] moves the zoom area in the opposite direction.

Notes

• If the page number is displayed in the upper right corner of the

screen when you perform a zoom operation, the number is replaced

by a zoom area indicator. This indicator shows you what part of the

image is currently enlarged on the display. You can turn the zoom

area indicator on and off by pressing the DISP button.

• Note that turning display of the zoom area indicator on and off dur-

ing a zoom operation also affects the display of the image number

in the Record Mode (page 27), and the memory page number in the

Playback Mode (page 35).

Changing the Location of the Zoom Area

Zoom area indicator

Operation

Using Auto Play

Auto play lets you automatically scroll through the camera’s memory

pages quickly and easily. You can specify the speed of the scroll.

Important!

• The camera’s Auto Power Off function (page 17) does not function

while an auto play operation is in progress. If you forget to turn the

camera off, there is the danger that auto play will continue until bat-

teries are dead. To avoid this, make sure that you stop the auto play

operation and turn the camera off when you finish viewing.

To start the auto play operation

1. Enter the Playback Mode and turn on the camera.

2. Start the auto play operation.

• Hold down the [+] and [–] buttons until the message “AUTO

PLAY START” appears.

• There must be at least two images (two pages) recorded in

memory to use the auto play operation. Otherwise, the

“AUTO PLAY START” message will not appear on the dis-

play.

• After about one second, this message disappears and the

auto play operation starts.

Playing Back Images

3 seconds 3 seconds

• Auto play continues to loop through the memory pages. This

means that when it reaches the last page, it starts again

from the first page.

3. Press the shutter button to stop the auto play operation.

• Pressing any button stops the

auto play operation.

• Note that the buttons of the cam-

era do not operate while a page

change operation is in progress.

Make sure that an image is shown

on the display when you press a

button to stop the auto play opera-

tion.

• You can also use auto play with the multi-page display.

Change to the multi-page display first, and then start auto

play.

–

Operation

Protecting Memory Pages

You can protect specific memory pages to ensure that they are not

accidently deleted.

To protect a page

1. Enter the Playback Mode and turn on the camera.

• Slide the function switch to the PLAY position.

• Slide the POWER switch in the direction indicated by the

arrow.

• If the page number is not shown in

the upper right of the page, press

DISP.

2. Scroll through the memory pages until the one you want to

protect is displayed.

• Press [+] to display the next

memory page or [–] to display the

previous memory page.

• You cannot protect or unprotect

memory pages while protected

memory pages are hidden (page

47).

Page number

POWER

DISP MODE

ON/OFF

–

/PROTECT ZOOM DISP MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio QV-70 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info