Bedienungsanleitung Casio QW3475 - GBD-H1000 G-SQUAD (Seite 37 von 58) (Englisch)

740165

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

6. While comparing the difference between

the altitude you found on the map and the

altitude differential displayed by the

watch, advance towards your destination.

Current location altitude

Altitude differential indicator

●

When the altitude differential you found

on the map is the same as that

displayed by the watch, it means you

are close to your destination.

Note

●

[-----] will appear on the display when a

reading is outside the allowable

altitude measurement range (±3,000

m (±9,840 feet)), or if a measurement

error occurs.

Calibrating Altitude

Readings

To minimize the difference between locally

indicated and measured values, you should

update the reference altitude value before

setting off on and during treks or any other

activities where you take altitude readings.

Also, you can ensure accurate measurements

by checking a map local altitude indications or

some other source for your current location’s

altitude, and regularly calibrating watch

readings with the latest information while

mountain climbing.

Note

●

You can find out the altitude at your

current location from signs, maps, on

the Internet, etc.

●

Differences between actual altitude

and watch readings can be caused by

the factors below.

ー　

Changes in barometric pressure

ー　

Changes in temperature caused by

variations in barometric pressure

and by elevation

●

Though altitude readings can be taken

without calibration, doing so may

produce readings that are very

different from indications by altitude

markers, etc.

1. Enter the Altimeter Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds.

This displays the Altimeter Mode setting

screen.

Pointer

3. Use (A) and (D) to move the pointer to

[CALIBRATION].

4. Press (C).

5. Use (A) and (D) to move the pointer to

[MANUAL].

●

To return the altitude setting to its initial

factory default value, select [OFFSET

OFF].

6. Press (C).

7. Repeat the steps below to input the

altitude in your current location.

●

Use (A) and (D) to change the

underlined value or symbol. To specify

a negative value, display the minus (-)

sign.

●

Use (C) to move between digits.

●

To stop the setting operation, press (E)

and advance to step 9.

8. After all the values are the way you want,

press (C).

9. Use (A) and (D) to select whether or not

you want to save your current settings.

[YES] Saves current settings.

[NO] Discards current settings.

[RETURN]

This returns to the altitude

manual calibration screen.

10. Press (C) to complete the setting

operation.

After the setting operation is complete,

[SETTING COMPLETED] will appear for

a few seconds, and then the Altimeter

Mode setting screen will re-appear.

11. Press (E) to exit the setting screen.

Setting Up the Auto

Measurement Interval

You can select an auto measurement interval

of either five seconds or two minutes.

1. Enter the Altimeter Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds.

This displays the Altimeter Mode setting

screen.

Pointer

3. Use (A) and (D) to move the pointer to

[INTERVAL].

4. Press (C).

5. Use (A) and (D) to select an auto

measurement interval.

[2 MINUTES]

Readings taken every

second for the first three

minutes, and then every

two minutes for about the

next 12 hours.

[5 SECONDS]

Readings taken every

second for the first three

minutes, and then every

five seconds for about one

hour.

6. Press (C) to complete the setting

operation.

After the setting operation is complete,

[SETTING COMPLETED] will appear for

a few seconds, and then the Altimeter

Mode setting screen will re-appear.

7. Press (E) to exit the setting screen.

Operation Guide 3475

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio QW3475 - GBD-H1000 G-SQUAD Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info