Bedienungsanleitung Casio WK-1630 (Seite 75 von 96) (Englisch)

586841

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

E-73

File Characteristics

Use the following procedures to specify the file characteristics for

each type of data during the rhythm data conversion procedure. These

steps should be performed for step 9 of the procedure under “Con-

verting Rhythm Pattern Data From Another Keyboard” on page E-

72.

(A) To specify Technics file characteristics

Use [+] and [–] to specify Bank A, B, or C, and then

press ENTER.

Use [+] and [–] to specify Area 0 or 1, and then press

ENTER.

(B) To specify Roland file characteristics

Use [+] and [–] to select either basic (B) or advanced

(A) and the chord type (M, m, 7th). Various combina-

tions are available, so scroll through the selections

until you find the one you want, and then press EN-

TER.

Use [+] and [–] to specify one of the three available

conversion processes, and then press ENTER.

To delete a file from a diskette

IMPORTANT!

The file delete operation cannot be undone. Make sure you no longer

need a file before you delete it.

Insert the diskette that contains the file you want to

delete into the keyboard’s disk drive. At this time close

the diskette’s write protect tab to enable writing.

Press the DISK button twice.

• This causes the “Option” disk operation screen to appear on

the display. The indicator lamp above the DISK button flashes

at this time.

Press [왔] three times to display the “Utility” screen.

–

Use [왗] and [왘] to display the “FileDel” (file delete)

screen, and then press the ENTER button.

• This causes a file name to appear on the screen as shown

below.

Use [+] and [–] to display the name of the file you

want to delete, and then press the ENTER button.

• The message “Sure?” appears on the display to confirm

whether or not you really want to delete the file.

Press YES to delete the file or NO to abort the opera-

tion without deleting anything.

• After the file is deleted, the message “Complete” appears on

the display for about one second. Then the keyboard returns

to step 4 of the above procedure.

❚

NOTES

❚

• To exit the above procedure at any time, press the DISK button so the

indicator lamp above it goes out.

• This keyboard cannot delete an SMF from a disk.

To format a floppy diskette

IMPORTANT!

Formatting a diskette that contains data deletes the data. Make sure

you no longer need any data that may be on a diskette before you

format it.

Press the DISK button twice.

• This causes the “Option” disk operation screen to appear on

the display. The indicator lamp above the DISK button flashes

at this time.

Press [왔] three times to display the “Utility” screen.

Use [왗] and [왘] to display the “Format” screen, and

then press the ENTER button.

• This causes the message “Insert FD” to appear, prompting

you to insert the diskette you want to format into the disk

drive.

Insert the diskette that you want to format into the

keyboard’s disk drive, and then press the ENTER but-

ton.

• The message “Sure?” appears on the display to confirm

whether or not you really want to format the diskette.

Press YES to format the diskette or NO to abort the

operation.

• The message “Pls Wait” remains on the display while the

format operation is being performed.

• After the diskette is formatted, the message “Complete” ap-

pears on the display for about one second. Then the key-

board returns to step 3 of the above procedure.

❚

NOTES

❚

• To exit the above procedure at any time, press the DISK button so the

indicator lamp above it goes out.

• A diskette formatted by MS-DOS or Windows can be used as it is on

WK-1800. Diskettes formatted for other types of computers are not com-

patible.

733A-E-075A

File name extension

File name

WK-1800/1600(E)-67~74 03.7.31, 5:22 PMPage 73 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-1630 Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info