Bedienungsanleitung Casio WK-3800 (Seite 59 von 108) (Englisch)

466898

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

E-57

Song Memory Function

To record chords with step recording

Press the SONG MEMORY button three times to

enter step recording standby, and then use the

number buttons to select the song number (0 to 4).

Make the following settings.

•Rhythm number

•MODE button

Press the CHORD/TR1 button, which is one of the

SONG MEMORY TRACK buttons, to select Track1.

•When recording starts, the REC indicator flashes on

the display. After a few moments the indicator stops

flashing, and remains on the display.

Press the SYNCHRO/FILL-IN NEXT button.

Play a chord.

•Use the chord play method that is specified by the

current MODE button setting (Fingered, CASIO

Chord, etc.).

•When the MODE button is set to Normal, specify the

chord using the root input keyboard and chord type

input keyboard. See “Specifying Chords in the

Normal Mode” on page E-58 for details.

* 96 clocks = 1 beat

Input the length of the chord (how long it should

be played until the next chord is played).

•Use the number buttons to specify the length of the

chord. See “Specifying the Length of a Note” on page

E-59 for details.

•The specified chord and its length are stored in

memory and the keyboard stands by for input of the

next chord.

•Repeat steps 5 and 6 to input more chords.

After you are finished recording, press the START/

STOP button.

•This enters playback standby for the song you have

just recorded.

•To play back the song at this time, press the START/

STOP button.

NOTE

•Use the procedure under “Correcting Mistakes While

Step Recording” on page E-61 to correct input mistakes

you make during step recording.

•You can add on to a track that already contains recorded

data by selecting that track in step 3 of the above

procedure. Doing so automatically locates the step

recording start point at the first beat immediately

following the previously recorded data.

•Inputting “0” as the chord length in steps 5 and 6 of the

above procedure specifies a rest, but the rest is not

reflected in the accompaniment contents when the

accompaniment is played.

Track 1 Contents After Step

Recording

In addition to chords, the following data is also recorded to

Track 1 during step recording. This data is applied whenever

Track 1 is played back.

•Rhythm number

•INTRO/ENDING 1 button, INTRO/ENDING 2 button,

VARIATION/FILL-IN 1 button, VARIATION/FILL-IN 2

button, SYNCHRO/FILL-IN NEXT button operations

NOTE

•You can also use number buttons 1 through 7, and button

9 to specify the button release timing for the VARIATION/

FILL-IN 1, VARIATION/FILL-IN 2, and SYNCHRO/FILL-

IN NEXT buttons. For more information, see “Specifying

the Length of a Note” on page E-59. Specifying release

timing specifies that the applicable button remains

depressed for a particular amount of time. If you do not

specify the release timing, it is assumed that the button

is pressed and then immediately released.

Flash

Ste

Rec

Cho r d

Chord name Measure, beat, and clock at

current location*

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-3800 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-3800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info