Bedienungsanleitung Casio WK-3800 (Seite 61 von 108) (Englisch)

466898

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

E-59

Song Memory Function

To record to Tracks 2 through 6 using

real-time recording

You can record to Tracks 2 through 6 while playing back what

you originally recorded on Track 1 and any other tracks that

are already recorded.

Press the SONG MEMORY button twice to enter

record standby, and then use the number buttons

to select a song number (0 to 4).

•The song number you select should be the one where

you previously input Track 1.

Use the SONG MEMORY TRACK buttons to select

the track you want to record to (2 through 6).

•While the keyboard is in record standby, the display

shows the level meters for channels 11 through 16, so

you can check which tracks have already been

recorded. See “Level Meter Contents During Record/

Edit Standby” on page E-61 for details.

IMPORTANT!

•The length of the ending depends on the rhythm you

are using. Check the length of the pattern you are using

and set the length of the chord accordingly in step 6.

Making the chord too short in step 6 can result in the

ending pattern being cut off.

To step record chords without rhythm

Skip step 4. The specified chord of the length specified by

the number buttons is recorded. A rest can be specified here,

so an original chord pattern can be created.

To add chord accompaniment part way through rhythm

play

In place of step 4 at the start of the recording, press

VARIATION/FILL-IN 1 or VARIATION/FILL-IN 2 button

and input rests. Then in step 5, input the chords. Only rhythm

is played where you input the rests, and then chord play starts

after the rests.

Recording Multiple Tracks

Track 1 of the keyboard’s song memory records Auto

Accompaniment and keyboard play. In addition, there are

five other melody tracks that you can use to record melody

parts only. You can record different tones to the melody tracks

and build a full ensemble of instruments for your recordings.

The procedure you use for recording to Tracks 2 through 6 is

identical to the one you use when recording to Track 1.

Specifying the Length of a Note

During step recording, the number buttons are used to specify

the length of each note.

Note lengths

Use number buttons [1] through [6] to specify whole notes

(), half notes ( ), quarter notes ( ), eighth notes ( ), 16th

notes ( ), and 32nd notes ( ).

Example: To specify a quarter note ( ), press [3].

Dots ( ) and triplicates ( )

While holding down the [7] (dot) or [9] (triplicate), use buttons

[1] through [6] to input the lengths of the notes.

Example: To input a dotted eighth notes ( ), hold down [7]

and press [4].

Ties

Input the first and then the second note.

Example: To input , press [4] and then [8]. Next, press

[5]. This note will be tied to the next note you input

(16th note in this example).

Rest

Hold down [0] and then use number buttons [1] through [9]

to specify the length of the rest.

Example: To input an eighth note rest, hold down [0] and press

[4].

•Pressing the [왘] CURSOR button inputs rests up to the

beginning of the next measure.

Track 1 Step Recording Variations

The following describes a number of different variations you

can use when recording to Track 1 using step recording. All

of these variations are based upon the procedure described

under “To record chords with step recording” on page E-57.

To start accompaniment with an intro pattern

In step 4, press INTRO/ENDING 1 or INTRO/ENDING 2

button after the SYNCHRO/FILL-IN NEXT button.

To switch to a rhythm variation

In step 5, press VARIATION/FILL-IN 1 or VARIATION/

FILL-IN 2 button immediately before inputting the chord.

To insert a fill in

In step 5, press VARIATION/FILL-IN 1 or VARIATION/

FILL-IN 2 button at the measure or beat immediately before

the chord or beat where you want to insert the fill in.

To insert an ending

In step 5, press INTRO/ENDING 1 or INTRO/ENDING 2

button at the measure or beat immediately before the chord

where you want to insert the ending.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-3800 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-3800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info