Bedienungsanleitung Casio WK-6600 (Seite 73 von 132) (Englisch)

522439

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Using the Song Sequencer

E-71

You can access the mixer during playback, playback standby,

or record standby (C-2 (RECORD) button flashing), or while

recording is in progress (C-2 (RECORD) button lit). Press the

C-5 (MIXER) button to display the mixer screen. To return to

the song sequencer mode screen, press the C-5 (MIXER)

button again or press the R-15 (EXIT) button.

The table below shows how mixer parts correspond to song

sequencer parts.

Supported Mixer Operations during Playback or Playback

Standby

All mixer settings can be configured during playback or

playback standby, subject to the following precautions.

• If you want to change mixer settings during playback

standby, change them after selecting the song you want to

play back. If you change mixer settings and then change

the song selection, the header settings of the newly

selected song will be recalled and mixer settings will be

changed accordingly.

• The only mixer settings you can change during playback

standby are those that are included in the song header of

the currently selected song. If mixer settings were changed

part way through when recording the song, the later

recorded mixer settings will supersede any settings you

make during playback standby.

Supported Mixer Operations during Record Standby

The mixer settings for the parts shown below (excluding part

on/off) are supported, depending on the track being recorded

to. Settings are recorded to the header settings (page E-66),

the same way settings are stored when recording is started.

Supported Mixer Operations During Recording

Mixer settings cannot be configured during recording to the

system track.

Configuration of mixer settings (except for part on/off) is

supported for a part (B01 through B16) that corresponds to a

track when recording to any track from 01 through 16 shown.

Any change in a mixer setting on the mixer screen is recorded

as soon as it is made.

For details about mixer functions and operations, see “Using

the Mixer” (page E-38).

The header of each song contains “header settings”, which

are settings that were in effect on the Digital Keyboard when

recording was performed. You can use a “panel record”

operation to rewrite a song’s header settings with the Digital

Keyboard’s current setup.

The following items are header settings that can be rewritten

using the panel record operation.

• Rhythm selection

• Tempo setting

• Scale setting

• The mixer settings below

– All part parameters from A04 through A07 and B01

through B16 (Excluding part on/off)

– Part parameters from A09 through A16: part on/off,

coarse tune, fine tune, scale enable, DSP line

– DSP parameters: volume, pan, reverb send

• Effect settings

• Accomp volume

• UPPER 1 part tone, UPPER 2 part tone, and LOWER part

tone selections

Press the C-3 (SONG SEQUENCER) button to

enter the song sequencer mode.

Use the dial or R-14 (–, +) buttons to select a

song area number.

Configure panel settings so they reflect the

settings you want to write as the header

settings.

• You can configure the following settings: mixer settings,

tempo, system track rhythm, track tone selection, etc.

• To change the system track UPPER 1, UPPER 2, and

LOWER part tones or mixer settings, use the mixer to

change the settings of parts A05 (UPPER 1), A06

(UPPER 2), and A07 (LOWER).

After all of the panels settings are the way you

want, hold the R-13 (FUNCTION) button as you

press the C-13 (MENU) button.

• This displays the song sequencer menu.

Mixer Settings in the Song Sequencer Mode

Mixer Song Sequencer

Parts A04 to A07, A09 to A16 System Track

Parts B01 to B16 Tracks 01 through 16

System Track Tracks 01 through 16

A05 (UPPER 1), A06 (UPPER 2),

A07 (LOWER), A04 (Auto

harmonize) parts

Parts corresponding to

each track

(B01 through B16)

Using Panel Record to Rewrite

Song Header Settings

To perform a panel record operation

CTK6200_e.book 71 ページ２０１１年１２月２７日　火曜日　午後８時２０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6600 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info