Bedienungsanleitung Casio WK-6600 (Seite 96 von 132) (Englisch)

522439

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Using the Song Sequencer

E-94

Use buttons R-1 (5) to R-4 ( • ) and buttons R-7 (6) to R-10 (,) to specify the length of the note you want

to input.

• For information about how to specify note lengths, see step 4 under “To insert an event” (page E-87).

• You can perform the following operations during step input to insert ties and rests.

Press the keyboard key that corresponds to the note you want to input.

• The note is input as soon as you press the keyboard key, and the cursor will move by the length you specified in step 5 to the

next measure:beat:tick. From there you can input the next note, if you want.

Repeat steps 5 and 6 to input the notes you want.

• If you want to input a series of notes of the same length, skip step 5 and perform step 6 only.

After inputting all of the notes you want, press the R-15 (EXIT) or R-17 (t, y) button.

• This returns to the event editor screen.

Pressing the C-13 (MENU) button while holding down the R-13 (FUNCTION) button during step input will display the input menu.

The following explains the meanings and setting ranges of the input menu items. The settings marked with an asterisk (*) in the

“Setting Range” column are initial defaults.

To do this: Perform this operation:

Tie the note at the

current cursor position

with the note event

immediately before it

1. At the current cursor position, specify the length of the note you want to tie with the immediately

preceding note event.

2. Press the R-11 (.) button.

• This adds the length of the note you specified in step 1 to the length of the note immediately

preceding it. At this time, the cursor will move forward by the timing of the added amount.

Insert a rest before the

current cursor position

1. At the current cursor position, specify a note that is the same length as the rest you want to insert.

2. Press the R-5 (REST) button.

• The cursor will move forward by the length of the note you specified in step 1.

Input Menu Setting Items

Item name Description Setting Range

GateRate

(Gate Rate)

Specifies the gate rate as a percentage of the actually input gate length for the

length (gate length) of the note event or chord event that was specified using

buttons R-1 (5) through R-4 ( • ) and R-7 (6) through R-10 (,). Specifying a

GateRate of 080% and inputting a quarter note (96 ticks), for example, will

result in a GATE setting of 00:76 (96 X0.8 = 76.8, cut off to 76).

001% to 080%* to 100%

Velocity

(Velocity)

Specifies the velocity value of an input note event or chord event. Specifying

“KeyOn” inputs a velocity value in accordance with applied key pressure.

KeyOn, 001 to 100* to 127

SysTrack

(System Track)

Selects either note event input or chord event input when inputting to the

system track.

note*, Chord

226

APreceding note event

BCurrent cursor position

CCursor position after process

BCurrent cursor position

CCursor position after process

CTK6200_e.book 94 ページ２０１１年１２月２７日　火曜日　午後８時２０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6600 Seite 96

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info