Bedienungsanleitung Casio WK-6600 (Seite 98 von 132) (Englisch)

522439

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Using the Function Menu

E-96

To exit the function menu, press the R-13

(FUNCTION) button or R-15 (EXIT) button.

• Note that all function menu settings you configure are

returned to their initial defaults whenever you turn off

the Digital Keyboard. You can configure the Digital

Keyboard so it remembers its latest settings or to apply

predetermined default settings each time you turn it on.

For details, see “AutoResume (Auto Resume)” (page

E-99) and “Default (Default Settings)” (page E-99).

• Some function menu settings also can be saved to

registration memory. For details, see “Saving

Keyboard Setups to Registration Memory” (page E-61).

This section explains the meaning of each function menu

setting item, and provides information about setting ranges

and initial default values.

• For each item, the initial default setting is indicated by an

asterisk (*).

Fine tunes the overall keyboard tuning in 0.1 Hz steps.

A4 = 415.5 - 440.0* - 465.9 Hz

One of five presets can be selected to change the overall

frequency characteristics of the sound.

• You can directly display this group screen without going

through the function menu. While the initial power on

screen is displayed, hold down the R-13 (FUNCTION)

button as you press the C-13 (MENU) button.

Select one of the settings below to specify the relationship

between key pressure and note volume.

Specifies the velocity value setting when the Touch setting is

off.

000 - 100* - 127

■Ped.Assign (Pedal Assign)

Specifies the operation of the pedal connected to T-3

(SUSTAIN/ASSIGNABLE JACK).

■Upper1, Upper2, Lower, A.HAR.

These settings specially on* (effect applied) or oFF (effect not

applied) for the UPPER 1, UPPER 2, LOWER, and Auto

Harmonize parts for the operation currently assigned to the

pedal.

• When the Pedal Assign setting is “rHy”, the on/off settings

of these parts are disabled, and the pedal functions as a

rhythm start/stop switch.

Specifies the range of pitch change that occurs when the

PITCH BEND wheel (S-1) is rotated.

00 - 02* - 24 semitones

Function Menu Settings

Tune (Tuning)

EQ (Equalizer)

oFF*: Equalizer off

Soft : Suppressed high tones for a softer sound

Bright : Enhanced high tones for a brighter sound

B.Boost : Enhanced low tones (Bass Boost)

Powerful : Enhanced volume

Lights

Performance (Performance/Accompaniment)

Group

Touch (Touch Response)

oFF : Constant note volume regardless of keyboard pressure

1*:Normal

2: Strong sound even with light pressure

TchOffVel (Touch Off Velocity)

Ped.Setting (Pedal Setting)

SUS*: Sustain pedal

SSt : Sostenuto pedal

SFt : Soft pedal

rHy : Rhythm start/stop switch

Upper1 : UPPER 1

Upper2 : UPPER 2

Lower :LOWER

A.HAR. : Auto Harmonize

BendRange (Bend Range)

CTK6200_e.book 96 ページ２０１１年１２月２７日　火曜日　午後８時２０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6600 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info