Bedienungsanleitung Casio XW-G1 (Seite 26 von 108) (Englisch)

586843

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Selecting and Creating Tones

E-24

KeyFolBase (V)

Key follow base. Keyboard key that is the center of key follow.

• Setting value can be specified using the keyboard keys.

C- to G9*

Env.Depth (V) Envelope depth. Specifies how the envelope shown below is applied. –64 to 0 to +63

Envelope >Ent

Pitch envelope. Group of editable parameters for envelope (Envelope Generator)

applied to the synth OSC, PCM OSC, and pitch shifter.

• The figure below also applies to filter, amp, and other envelopes. With the pitch

envelope, the pitch of the sound corresponds to the vertical (Level) axis.

Init.Level (V) Initial level. Pitch of the sound at initial note on. –64 to 0 to +63

Atk.Time (V) Attack time. Time it takes until the attack level is reached from the initial level. 0 to 127

Atk.Level (V) Attack level. Target level reached immediately after note on. –64 to 0 to +63

Dcy.Time (V)

Decay time. Time it takes for the sound to reach the sustain level from the attack

level.

0 to 127

Sus.Level (V)

Sustain level. Level the sound is sustained as long as a key or pedal is

depressed.

–64 to 0 to +63

Rel.Time1 (V) Release time 1. Time it takes to reach Release Level 1 after a key is released. 0 to 127

Rel.Level1 (V) Release level 1. Target level reached immediately after a key is released. –64 to 0 to +63

Rel.Time2 (V) Release time 2. Time it takes to reach Release Level 2 from Release Level 1. 0 to 127

Rel.Level2 (V) Release level 2. Second target level reached after a key is released. –64 to 0 to +63

Clk.Trig

Clock trigger. Specifies the number of beats for resetting the envelope. Selecting

a setting from 1/4U to 4U resets to the timing of the up beat.

Off, 1/4, 1/3, 1/2, 2/3,

1, 3/2, 2, 3, 4, 1/4U,

1/3U, 1/2U, 2/3U, 1U,

3/2U, 2U, 3U, 4U

Ext.Trig

(Block (5)

only)

External trigger. When on, the envelope is reset by an external trigger. Off, On

LFO1 Depth (V) LFO1 depth. Specifies how LFO1 from Block (8) is applied. –64 to 0 to +63

LFO2 Depth (V) LFO2 depth. Specifies how LFO2 from Block (9) is applied. –64 to 0 to +63

PulseWidth

(Blocks (1) and (2) only) (V)

Pulse width. Adjusts the width of the square wave when the synth wave is a

square wave.

0 to 127

PWM LFO1 Dep

(Blocks (1) and (2) only) (V)

PWM LFO1 depth. Adjusts the depth of pulse width modulation by LFO1.

–64 to 0 to +63

PWM LFO2 Dep

(Blocks (1) and (2) only) (V)

PWM LFO2 depth. Adjusts the depth of pulse width modulation by LFO2. –64 to 0 to +63

Sync OSC (Block (2) only)

Oscillator sync. Turning on this resets the Block (2) sound wave in accordance

with the Block (1) sound wave period, cause them to become synced.

Off, On

Display Text Description Settings

RL1

RL2

AT DT RT1 RT2

Level

Time

IL : Init Level RT1 : Release Time1

AT : Attack Time RL1 : Release Level1

AL : Attack Level RT2 : Release Time2

DT : Decay Time RL2 : Release Level2

SL : Sustain Level

PWM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio XW-G1 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio XW-G1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info