Bedienungsanleitung Casio XW-G1 (Seite 27 von 108) (Englisch)

586843

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Selecting and Creating Tones

E-25

OriginalKey (Block (5) only)(V)

Original key. Selects the keyboard keys where the externally input sound to

Block (5) is sounded as-is at its original pitch.

• Setting can be specified using the keyboard keys.

C- to G9*

MicInstLvl (Block (5) only) (V) Mic/inst level. Level of external input sound to Block (5). 0 to 127

TrigThresh (Block (5) only) (V)

Trigger threshold. Specifies the external input level threshold value that

determines whether or not an external input trigger (page E-24) is applied.

0 to 127

TrigRelease

(Block (5) only) (V)

Trigger release time. Adjusts the time following external input trigger (page E-24)

operation that the next trigger operation is blocked.

0 to 127

P.ShiftMode (Block (5) only)

Pitch shifter mode. A larger setting value lengthens the time until note on, but

increases tone quality. When this setting is off, the same pitch sounds no matter

which keyboard key is pressed.

Off, 1, 2, 3

P.ShiftMix (Block (5) only)

Pitch shifter mix. Specifies the volume ratio between the pitch shifted sound (shift

sound) and the unshifted sound.

0: Shift sound only

7: Both sounds at same volume

15: Original sound only

0 to 15

Noise Type (Block (6) only)

Noise type. Selects the type of noise generated by Block (6). White noise (equal

noise for all frequencies), pink noise (noise inversely proportional to the

frequency) and other types of noise are available.

• See the separate “Appendix” for a complete list of noise types.

See the separate

“Appendix”.

Filter >Ent

Filter. Group of editable parameters associated with the filters (tones) in each

block.

Gain

Gain. Specifies how the volume of frequency components that are higher than

the cut off frequency setting value described below is attenuated. There is no cut

off when “Flat” is specified here.

–18dB, –12dB, –6dB,

–3dB, Flat

Cutoff (V) Cutoff frequency. Specifies the filter cutoff frequency. 0 to 15

TouchSense (V)

Touch sense. Specifies the degree of change in the filter in accordance with

change in keyboard playing touch.

–64 to 0 to +63

KeyFollow (V)

Key follow. Adjusts the amount of filter change between neighboring keyboard

keys. A higher value represents greater change.

–128 to 0 to +127

KeyFolBase (V)

Key follow base. Keyboard key that is the center of key follow.

• Setting can be specified using the keyboard keys.

C- to G9*

Env.Depth (V) Envelope depth. Specifies how the envelope shown below is applied. –64 to 0 to +63

Envelope >Ent

Filter envelope. Group of editable parameters for envelope (Envelope Generator)

applied to filters.

• For details about group items and setting ranges, see “Pitch Envelope”. With

this group, the vertical (Level) axis in the pitch envelope diagram corresponds

to how the filter is applied.

0 to 127 (Initial Level

to Release Level 2)

• The setting ranges

for Clock Trigger

and External Input

Trigger are the

same as those for

Pitch Envelope.

LFO1 Depth (V) LFO1 depth. Specifies how LFO1 from Block (8) is applied. –64 to 0 to +63

LFO2 Depth (V) LFO2 depth. Specifies how LFO2 from Block (9) is applied. –64 to 0 to +63

Amp >Ent

Amp. Group of editable parameters associated with the amp (volume) in each

block.

Volume (V) Volume. Specifies the amp volume. 0 to 127

TouchSense (V)

Touch sense. Specifies the degree of change in volume in accordance with

change in keyboard playing touch.

–64 to 0 to +63

KeyFollow (V)

Key follow. Adjusts the amount of volume change between neighboring keyboard

keys. A higher value represents greater change.

–128 to 0 to +127

KeyFolBase (V)

Key follow base. Keyboard key that is the center of key follow.

• Setting can be specified using the keyboard keys.

C- to G9*

Envelope >Ent

Amp envelope. Group of editable parameters for envelope (Envelope Generator)

applied to amps.

• For details about group items, see “Pitch Envelope”. The vertical (Level) axis in

the pitch envelope diagram corresponds to the volume in the case of this

group. However, the setting range for the nine items from Initial Level to

Release Level 2 is 0 to 127, which is different from the pitch envelope items.

0 to 127 (Initial Level

to Release Level 2)

• The setting ranges

for Clock Trigger

and External Input

Trigger are the

same as those for

Pitch Envelope.

LFO1 Depth (V) LFO1 depth. Specifies how LFO1 from Block (8) is applied. –64 to 0 to +63

LFO2 Depth (V) LFO2 depth. Specifies how LFO2 from Block (9) is applied. –64 to 0 to +63

Display Text Description Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio XW-G1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio XW-G1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info