Bedienungsanleitung Caso ECO 3400 (Seite 13 von 58) (Holländisch, Spanisch)

519063

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Installing the device

• Place the device on a stable and level surface.

• Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).

• Do not block the ventilation slots of the device. This may overheat the device. Keep a

minimum distance of 5 to 10 cm to walls or other items.

• Do not place the induction hotplate next to devices or objects, which react sensitively to

magnetic fields (e.g. radios, TVs, cassette recorders, etc.).

• Do not place induction hotplates next to open fires, heaters or other sources of heat.

• The induction cook top is not suitable for installation into other units.

• Make sure that the mains connection cable is not damaged or squashed beneath the

device.

• Make sure that the mains connection cable does not come into contact with sharp edges

and/or hot surfaces.

• The device should be connected to a rolled-out extension cable with a maximum length of

3 m and a cross-section of 2 mm. If an intermediate switch is used, it must be rated at min.

16 A.

• "The appliance is not intended to be operated by means of an external timer or separate

remote control system."

• Do not operate the device on top of any other electric appliances such as ceramic hob or

electronic oven etc.

• Do not operate the device on any metallic surface which is too thin and easy to become

deformed.

Commissioning the device

• Prior to connecting the device, check whether the voltage indicated on the type plate

corresponds to the voltage supply in your home. A wrong connection may lead to grave

damage on the device and injury to persons.

• The two hotplate surfaces consist of temperature-resistant ceramics. In case of damage,

even if this concern only a small tear, disconnect the device from the power supply

immediately and contact the customer service.

• We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or other

metal objects on the hotplate. These may heat up when the device is turned on.

• Place the hot pans in the hob area only. Never place them on the control panel or the

frame.

• Do not place any magnetically objects like credit cards, cassettes etc. on the glass

surface while the device is in operation.

• On order to avoid overheating, do not place any aluminium foil or metal plates on the device.

Warning: Please do not put the induction cooker on an iron/steel board, while operating.

Due to electromagnetic reason, the iron/steel board may heat and damage the bottom of the

induction cooker.

• Do not insert any objects like wires or tools into the ventilation slots. Attention: this may cause

electric shocks.

• Do not touch the hot surface of the ceramic field. Please note: the induction hotplate does

not heat up itself during cooking, but the temperature of the cookware heats up the hotplate!

• If you do not use the device for an extended period, we recommend you disconnect it

from the electric outlet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caso ECO 3400 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caso ECO 3400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info