Bedienungsanleitung Caso ECO 3400 (Seite 15 von 58) (Holländisch, Spanisch)

519063

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Operating the device

• Plug the power plug into a suitable outlet.

• The temperature of the cooker plate surface displayed: is the temperature of the

surface of the induction cooker lower than 50°C, the display shows „L“. When the

temperature of the cooker plate surface is over 50 °C, it is displaying „H“.

acoustic signal sounds. Now the device is in standby mode.

• Place suitable cookware in the centre of one of the cooking fields.

• You can operate the left cooking field with 2000 W and the right cooking field with

1400 W separately.

• Now press the ON/Standby switch 1. to turn on of the two induction hotplates on. The

control lamps of function “Stufe” and “Temp” blink and an acoustic signal sounds.

• Press the Function Key 3. The preset power stage "5" is selected and the device turns on.

• With the + / - Keys (5+6), you can change the settings at any time in a range from 1 – 10

• Press the Function Key 2. to select the temperature. The preset temperature stage "120°C" is

selected and the device turns on.

• With the + / - keys, you can change the settings at any time in a range from 60 – 240°C.

(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)

• Timer Function. After the selection of the temperature mode press the button Time 4. until

the corresponding control lamps blink. The display shows the number "0". With the +/-

keys, you can now select the operating time in 1-minute intervals (up to max. 180

minutes). Once the time is up, an acoustic signal sounds and the device automatically

goes into standby mode. Notice: during timer operation, you can change the duration at

any time with the +/- keys. With the memory function of the device, the power stage or

temperature settings remain unchanged here.

You can also change to the power stage selection or the temperature stage selection with

the "Function" button and change the settings there without changing the preset time.

• Do not place any empty cookware on the ceramic field. Heating an empty pot or pan

activates the overheating protection and the device turns off.

• Do not operate the device if it is damaged in any way or does not function properly.

• The use of accessories and spare parts not recommended by the manufacturer may lead

to damage on the device and injuries.

• In case of “E05” appearing in the display the over heat protection has been activated.

This means that the temperature had increased to a temperature of 170°C. In this case the

device turns off automatically in order to avoid damages.

Therefore we recommend to select the function “Stufe” in case of steaming food or boiling

water for example.

In case of grilling or cooking deep fry food we would advise you to use the function

“Temperatur” as in this case you can use temperatures up to 240°C.

In case of “E05” please pull the power plug in order to reset the device. After this you can use

it again as usual.

When you switch off the device via “On/Standby” and the temperature of the cooker plate

surface is lower than 50°C, the display shows „L“. When the temperature of the cooker plate

surface is over 50 °C, it is displaying „H“.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caso ECO 3400 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Caso ECO 3400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info