Bedienungsanleitung CAWI 7202 (Seite 4 von 7) (Französisch)

622510

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Bedienungsanleitung Nr. 9999-041-0

Seite 4

B7202_E_1.pmd

12.06.2003

Initiate programming

Select P - No. 1

Confirm the entry

Select the user combination to be deleted, e.g. 2 °

Confirm the entry

Enter the 6-digit master combination

Confirm the entry

Re-confirm the entry

Cancel

The previous user

combination will be

retained if there is an error in the

deletion sequence.

° = UNo. 1

= UNo. 5

If fewer than 3 user combinations

are programmed, then any

combination interlock which may

have been programmed

previously will have to be

deleted. See Section 8.5.2

8.2.1 Deleting a user combination

A user combination can be deleted only by master combination owner and only with the electronic lock open.

Green LED blinks once

OK = green LED blinks once

and low-high tone sounds.

Error = 12 high-pitched

tones and red LED lights.

Function Operation, button(s) Response Comments

Explanation: Timed delay period = Period between entering a combination the first time and the time

at which the electronics clear the lock for entry

of a combination the second time, to actually open the safe.

Relaese period =

Period of time available, once the timed delay period has

expired, to open the safe by entering a combination.

Timed delay period of 1 to 3 minutes = 30 second release period

Timed delay period of 4 to 10 minutes = 1 minute release period

Timed delay period of 11 to 59 minutes = 2 minute release period

8.3 Programming a timed delay period

Possible only with the electronic lock open and only with the master combination.

Initiate programming

Select P - No. 3

Confirm the entry

Enter 6-digit master combination, e.g.

Confirm the entry

Enter timed delay period °. e.g. 1 minute

Confirm the entry

Cancel

° = 1 minute to

= 59 minutes

Green LED blinks once

OK = green LED blinks once

and low-high tone sounds.

Error = 12 high-pitched

tones and red LED lights.

Function Operation, button(s) Response Comments

8.3.1 Opening the lock with the timed delay function activated

A timed delay period, once it has been programmed, is applicable

to all combinations. Once a valid combination has been entered

the green LED will blink at 5-second intervals during the timed

delay period. During this delay period the electronics will not

respond to any keypad entries. The end of this timed delay period

is signaled by 15 signal tones; the green LED lights. The release

period begins running and you can now open the electronic lock

by entering your combination again.

If a combination interlock was programmed (see

Sections 8.5 and 8.5.1), then only one combination need

be entered during the release period.

If an invalid combination is entered or the „C“ button is

pressed during the release period, then the entire opening

procedure will have to be repeated. This means that, once a

valid combination has been entered, the timed delay period will

begin running anew.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

CAWI 7202 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von CAWI 7202

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info