Bedienungsanleitung Chamberlain WD962KEV (Seite 39 von 48) (Englisch)

555431

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Operation

Using the Smart Control Panel (continued)

Light Feature

The lightswill turn on when someone enters through the open garage door and the safety reversing

sensor infrared beam is broken.If using the garage door opener lightas a work light,turn the light on

using the light button on the wall control or the light will turn off if you are beyond the range ofthe sensor.

LOCK

The LOCK feature isdesigned to prevent activation ofthe garage door opener from remote controls

while still allowing activation from the door control and keyless entry.Thisfeature isuseful for added

peace of mind when the home isempty (i.e.vacation).

When the Lockfeature ison, your remote controlshave been disabled and a message will display on the

door control (Figure 1).

TIMER-TO-CLOSE (TTC)

DO NOT enable TTC if operating a one-piece door. TTCcan be set to automaticallyclose your garage

door from the fully open position after a specified period of time (1, 5,10 minute intervals or a custom

setting up to 99 minutes).The screen on the door control can display the status of the TTC.Once the TTC

has been set and the door isopen,the selected close interval will be displayed on the screen and toggle

between the time and TTCmessage. When the TTC ison, a message will displayon the door control

screen (Figure 2).

To temporarily suspend the TTC feature pressand release the HOLD button.Press REL button to

resume normal TTC operation (Figure 3).

BATTERY BACKUP

If your garage door opener has a battery backup one oftwo messages will display on the door control if

there isa problem with the battery (Figures 4 and 5).

Figure 2 Figure 3

Figure 1

Figure 4

Figure 5

SMART CONTROL PANEL MENU

The features on the door control can be programmed through a series ofmenus on the screen and the

navigation buttons.

Navigation Buttons

Screen

Use the navigation buttons to make selections and program features.

The screen will display the time, temperature, and

current battery charge (if applicable) until the menu

button is pressed, and then it will display the menu

options. If there is a problem with the garage door

opener the screen will display the Diagnostic Code.

FEATURES MENU

Press the navigation button below “MENU” to viewthe Features menu.

Set the time, choose 12 or 24 hour clock and show/hide clock.

Set the Timer-to-Close feature off/on and set the time interval

before door closes.

Enable/disable lock.

Add remote controls, MyQ

devices, an extra remote button

to control your garage door opener lights, or a keyless entry.

SETTINGS MENU

Press the navigation button below the down arrow till you see TEMPERATURE to view the Settings

menu.

Display the temperature in Fahrenheit or Celsius and

show/hide the temperature.

Select a language.

Set duration for garage door opener light to stay on after

operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn the

Motion sensor off/on, and turn the entry light feature off/on.

Adjust the contrast of the screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chamberlain WD962KEV Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info