Bedienungsanleitung Chicco Miinimo3 (Seite 12 von 88) (Alle Sprachen)

767845

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

portation. In this case, do not use

and keep out of reach of children.

• The product must only be assem-

bled by an adult.

• This product must only be used by

an adult.

• Make sure that the person using the

stroller knows how to operate it in

the safest way.

• During adjustment operations, en-

sure that the moving parts of the

stroller do not come into contact

with your child.

• To avoid all strangulation hazards,

never give children objects with

cords or strings attached, or leave

them close to such objects.

• Never use the stroller on staircases

or escalators: you could suddenly

loose control of it.

• Always pay attention when going

up and down steps or pavements.

• If the stroller is left exposed to direct

sunlight for an extended period of

time, allow it to cool down before

placing your child inside. Prolonged

exposure to direct sunlight may

cause the colour of the materials

and fabric to fade.

• Prevent the stroller from coming

into contact with salt water. It may

cause rusting.

• Do not use the stroller on the

beach.

• When not in use, the stroller should

be kept out of reach of children.

LIST OF COMPONENTS

Check that none of the components of this model are missing be-

fore assembling the product. If any part is missing, contact Chicco

Customer Service. No tools are needed to assemble this product. The

following pieces are needed for product assembly:

• Frame

• 2 Front wheels

• 2 Rear wheels

• Sun canopy

• Storage basket

• Bumper bar

• Fabric cover

• Padded shoulder straps and crotch strap.

• Rain cover

• Stroller bag/backpack

TIPS FOR CLEANING AND MAINTENANCE

This product requires periodical maintenance.

Cleaning and maintenance operations must be performed exclusive-

ly by an adult.

CLEANING

The lining can be removed (please see the section FITTING AND RE-

MOVING THE STROLLER LINING).

Clean the fabric parts using a wet terry towel and neutral soap.

Periodically wipe the plastic parts clean with a soft damp cloth.

To prevent the formation of rust, always dry metal parts if they have

come into contact with water.

The washing symbols and relative meanings are indicated below:

Hand wash

Do not bleach

Do not tumble dry

Do not iron

Do not dry clean

MAINTENANCE

If necessary, lubricate the moving parts with dry silicone lubricant.

Regularly check the condition of the wheels and clean o all dust and

sand. To avoid friction that may compromise the correct functioning

of the stroller, make sure all plastic parts that run along the metal

tubes are clean of dust, dirt and sand.

Keep the stroller in a dry place.

FIRST ASSEMBLY OF THE STROLLER

1. To open the stroller, pull the release lever located on the side (Fig.

1), rotate the handle and lift it until the frame is fully open (Fig. 1A);

make sure that the front feet are locked and ensure that the handle

is fully extended and engaged (Fig. 1B).

WARNING: Before use, make sure that the stroller is locked in open

position, checking that the mechanism is actually locked.

ASSEMBLING THE FRONT AND REAR WHEELS

2. Assemble the front wheel by inserting the front leg tube in the ap-

propriate hole until hearing a locking click (Fig. 2). Repeat the same

operation for the second front wheel.

3. To assemble the rear wheels insert the wheel’s pin into the rear axle

tube as shown in gure 3. Repeat the same operation for the other

wheel.

WARNING: Before using the stroller, make sure that the wheels are

well secured to the structure, pulling them rmly.

SUN CANOPY

4. To mount the hood to the stroller’s frame insert the metal rod into

the hole positioned under the handle (Fig. 4), mount the elastic

hole into the special seat (Fig. 4A) and insert the hood joint into

the special sliding it in as far as possible (Fig. 4B). To complete the

operation, mount the elastic band to the lower pin located on the

rear side of the handle’s tube (Fig. 4C). The rear fabric section of the

hood can be hooked to the backrest by means of velcro pads pro-

vided (Fig. 4D)

WARNING: The canopy must be xed to both sides of the stroller.

Ensure that the hood is correctly secured into position.

5. To adjust the hood, pull and/or push it centrally (Fig. 5). The hood can

be extended by opening the zip. To remove the hood from the frame,

carry out the procedure shown in point 4 in the reverse order.

WARNING: Keep the hood out of reach of children when it is not

in use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chicco Miinimo3 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info