Bedienungsanleitung Chicco Miinimo3 (Seite 13 von 88) (Alle Sprachen)

767845

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

HOW TO USE THE SAFETY HARNESS

This stroller has a ve-point safety harness featuring two shoulder

straps, two adjustment holes, a waist strap and a crotch strap with

buckle.

6. WARNING: For use with children from birth to about 6 months, the

shoulder straps must be passed through the two horizontal adjust-

ment holes before use and the waist straps must be inserted in the

vertical holes (Fig. 6). After laying the child in the stroller, fasten the

belts by threading rst the two forks inside the shoulder straps’ slot

and then introduce them inside the crotch strap buckle (Fig. 6A);

adjust the length of the straps, ensuring that they adhere to the

child’s shoulders and body correctly.

7. To unfasten the waist belt, press and pull the lateral forks (Fig. 7-7A).

WARNING: Always use the restraint systems. For the safety of your

child use all ve xing points of the safety harness belts.

Make sure to reassemble correctly the waist straps (e.g. after washing

) and the crotch strap, threading them through the holes located on

the backrest and on the seat. The harness must be re-adjusted.

ADJUSTING THE BACKREST

The backrest can be adjusted to 4 positions.

8. To lower the backrest, lift the adjusting handle located on the rear

of the backrest (Fig. 8).

9. To raise the backrest, simply lift it to the desired position (Fig. 9).

WARNING: The child’s weight can make these operations more dif-

cult.

REAR BRAKES

The rear wheels have linked brakes, which can be applied simultane-

ously on both rear wheels using one pedal only.

10. To operate the stroller’s brakes, press downwards the pedal locat-

ed at the centre of the rear wheels axle (Fig. 10).

11. To release the brakes, push upwards the pedal located at the cen-

tre of the rear wheels axle (Fig. 11).

FRONT SWIVEL WHEELS

12. To make the wheels swivel, lift the lever found between the two

wheels (Fig. 12).

13. To lock the wheels, raise the lever (Fig. 13).

WARNING: Both front swivel wheels must always be locked or un-

locked at the same time.

WARNING: The swivel wheels make the stroller easier to handle; in

order to guarantee better stability, it is advisable to lock the wheels in

place on uneven ground (gravel, unpaved roads, etc.).

HOW TO ADJUST THE LEGREST

The stroller’s legrest can be adjusted into 2 positions for your child’s

improved comfort.

14. To adjust the legrest in the desired position, operate simultane-

ously the two side levers (Fig. 14). To raise the legrest up from the

down position, just pull it up.

CARRY-ALL BASKET

The storage basket is already installed.

15. In order to remove it, release the six snap buttons located on the

basket sides (3 per side) and extract the straps from the holes lo-

cated on the frame (Fig. 15).

RAIN COVER

16. To mount the rain cover, fully open the hood, wrap the velcro

around the stroller tubes in the positions shown in gure 16; re-

peat this operation on the other side.

When you have nished using the rain cover, allow it to dry properly

if it is wet.

WARNING: Use only the supplied rain cover.

WARNING: The rain cover cannot be used on the stroller without

hood, as it may cause suocation.

WARNING: When the rain cover is tted on the stroller, never leave it

exposed to direct sunlight with your child inside, as the temperature

will rise considerably.

FITTING AND REMOVING THE STROLLER LINING

17. to remove the lining from the frame, remove the hood following

the procedure shown in point 4 in the reverse order. To remove

the fabric part of the stroller, extract the side ap from the 3 plas-

tic pins located on the rear side of the handle tube (Fig. 17) on

both sides, then remove the two waist straps and the crotch strap

form the special holes located on the backrest and on the seat

(Fig. 17A-17B).

18. Release the fabric ap from the pin located under the seat (Fig. 18)

making sure to carry out the same operation also on the other side,

then complete the operation releasing the belt located under the

seat (Fig. 18A). Unhook the two side snap buttons (Fig. 18B) and re-

move the fabric from the pin (Fig.18C). At this point the fabric part

is released from the frame and can be extracted from the legrest

(Fig. 18D).

To complete the removal of the backrest fabric part, slide inwards the

plastic component positioned on the sides and pull the fabric part

upwards (Fig. 18E). The operation must be performed on both sides

of the backrest.

To reinstall the fabric part on the stroller, repeat the above procedure

in the reverse order, making sure to tension again the belt located

under the seat (Fig. 18A) at the end of the procedure.

FOLDING THE STROLLER

WARNING: When opening the stroller, ensure that your child and any

other children are at a safe distance.

WARNING: Make sure that during these operations the moving parts

of the stroller do not come into contact with your child.

WARNING: Before folding the stroller, make sure that the storage

basket is empty and the canopy is closed.

19. To close the stroller, push switch A to the left and simultaneous-

ly press the button B (Fig. 19). Rotate the handle forward until it

aligns with the side tube (19A) and push it down until it clicks into

place.

20. The stroller, once closed, stands by itself (Fig. 20A) and can be eas-

ily carried along by means of its useful carrying strap (Fig. 20B).

BUMPER BAR

The stroller is equipped with a bumper bar that can be folded when

closing.

21. To remove the bumper bar, press the two buttons on the side of

the bumper bar (g. 21) and pull the bar towards you. To seat your

child in the stroller more easily it is possible to open just one side

of the bumper bar.

22. To fasten the bumper bar to the structure again, insert the two plas-

tic ends of the bumper bar in the supports as illustrated in Fig. 22.

WARNING: Always fasten your child with the safety harnesses. The

BUMPER bar IS NOT a device for containing your child.

WARNING: Never use the bumper bar to lift the stroller up with your

child sitting in it.

NOTE: On the Chicco Miinimo3 stroller it is possible to attach the fol-

lowing elements, which can be purchased separately:

• CHICCO soft carrycot

• KeyFit Car Seat

• Kaily Car Seat

• Kiros I-size Car Seat

All car seats for use on the stroller require the special adaptors sold

separately.

FOR THE ASSEMBLY AND/OR USE OF THE ITEMS LISTED ABOVE, REFER

TO THE RELEVANT MANUALS.

WARRANTY

The product is guaranteed against any conformity defect in normal

conditions of use as stated in the instructions. Therefore, the warranty

does not apply in the case of damage caused by improper use, wear

or accidental events. For the duration of warranty on conformity de-

fects, please refer to the specic provisions of national laws applicable

in the country of purchase, where provided.

Chicco Miinimo3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info