Bedienungsanleitung Chicco Next 2 Me Forever (Seite 19 von 139) (Alle Sprachen)

767855

Zoom out

Zoom in

Vorherige Seite

1/139

Nächste Seite

away from electrical cables and

cords: do not position close to

windows where cords, curtains or

similar could pose a suﬀocation or

choking hazard. To avoid all risks of

strangulation, never give children

objects with cords or strings at-

tached, or leave them within their

reach.

• When your child is unattended in

the product, always make sure that

the side is raised and locked in

closed position, and aligned

with the upper perimeter of the

product.

• All connectors must be correctly

secured at all times. Check them

regularly and tighten if necessary.

• Newborn babies can suﬀocate on

soft beds. Avoid placing cushions

or similar objects underneath new-

born babies when they sleep.

FLOOR BED FOR TODDLERS USE

IMPORTANT – READ CAREFULLY

AND KEEP FOR FUTURE REFER-

ENCE.

WARNINGS

• WARNING: The product is in-

tended for use by children over 18

months of age.

• WARNING: To prevent the risk of

ﬁre, do not place the cot near fans,

electric bar ﬁres, gas ﬁres or other

sources of heat.

• Do not leave any small objects

inside the product that might

cause choking or strangulation.

COMPONENTS

A) Legs

A1) Leg with folding foot (x2)

A2) Leg with ﬁxed foot (x2)

B) Upper frame

C) Base

C1) Rear strap fastening buckle (x2)

D) Folding side barrier

D1) Side

D2) Side tilting button

D3) Side removal button (x2)

D4) Safety strap (x2)

E) Mattress

E1) Lower Velcro strap

E2) Upper Velcro strap

E3) Lower mattress

E4) Upper mattress

F) Frame for height adjustment (x2)

F1) Adjustment button

F2) Tubular elements

G) Fastening strap (x2)

G1) Grey cot safety strap fastening buckle

G2) Grey bed fastening and height adjustment prong

H) Fabric

H1) Bed base snap button (x9)

H2) Internal snap button (x2)

H3) External snap button (x2)

H4) Base zipper (x3)

H5) External vertical zipper (x2)

H6) Internal vertical zipper (x2)

FIRST ASSEMBLY

1. Lay the base “C” on the ﬂoor (Fig. 1), insert the frame for height

adjustment “F” (Fig. 2) taking care to hold the adjustment buttons

“F1” outwards. Push the tubular elements “F2” all the way down

until you hear a click. Repeat this step on the other side (Fig. 3).

2. Bring the assembled block to point 1 on the folding side barrier

“D”, engage the tubular elements “F2” at the top and the rectangu-

lar hooks at the bottom of the barrier “D” (Fig. 4). Insert all four fas-

tening devices until you hear the click that are correctly fastened.

3. Assemble the lower tubular element of leg “A1” by inserting it into

the hole at the base of the leg “A2” (Fig. 5), taking care to keep the

smooth part (without screws) on the same side. You will hear a click

if correctly assembled. Repeat the same step for the other leg.

4. To make it easier to assemble the legs, fold the structure assem-

bled so far on the short side. Making sure that the smooth part

of the legs (without screws) faces outwards, slide the leg tubes

“A” into the lower holes under the base “C” (Fig. 6) and slide them

into the holes of the height adjustment frame “F” (Fig. 7-7A) until

completely locked. Repeat this step with the other leg.

5. Press the adjustment buttons “F1” (Fig. 8) to lower the cot com-

pletely.

6. Insert and slide the upper frame “B” (making sure that the fasten-

ing pins are facing down) into the through-hole of the fabric “H”

(Fig. 9-9A).

7. Assemble the upper frame “B” with fabric in the holes of the

height adjustment frame “F” (Fig. 10) until you hear a locking click

(Fig. 11).

8. Place the fabric on the upper perimeter of the cot (Fig. 12), fasten

all the snap buttons in the bed base “H1” (Fig. 13), close the two in-

ternal vertical zippers “H6” (Fig. 14), and repeat the operation with

the two external vertical zippers “H5” (Fig. 15).

9. Fasten the internal snap buttons “H2” (Fig. 16) and the external

snap buttons “H3” (Fig. 17) to the folding side barrier “D”.

10. Close the zippers of the base “H4” (Fig. 18).

11. Place the mattress “E” (Fig. 19).

HEIGHT ADJUSTMENT

12. The product can be adjusted in 11 diﬀerent heights. To adjust

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chicco Next 2 Me Forever Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info