Bedienungsanleitung Chicco Tafelhangstoel 360 (Seite 10 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

500829

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

IMPORTANT! READ CAREFULLY AND KEEP FOR FU-

TURE REFERENCE.

WARNING: KEEP THE PLASTIC BAGS OUT OF REACH

OF CHILDREN TO PREVENT CHOKING HAZARD.

WARNINGS

• WARNING: Never leave the child unattended.

• WARNING: Always use the child restraint and table attach-

ment systems.

• WARNING: Always check the security and the stability of

the product before use.

• WARNING: Maximum weight: 15 kg.

• WARNING: This product is intended for children able to sit

up unaided. Age range: from 6 months onward.

• WARNING: Do not use tablecloths or other objects on the

table that may interfere with the proper operation of the

fastening devices. Keep the table surface clean and dry.

Keep the table structure and surface clean and dry.

• WARNING: Check the locking screws regularly and tighten

as needed.

• WARNING: Do not use the product when any component

is broken, torn or missing.

• WARNING: Do not use accessories or replacement parts oth-

er than those approved by the manufacturer or distributor.

• WARNING: Do not fasten the product in points where your

child could use his feet to push against parts of the table,

chairs or other structures thus making the seat move and

creating situation of instability.

• WARNING: This product is not t for all types of table. Do

not fasten to: Tables with glass or crystal surfaces or the

like; Tables with uneven or rough surfaces; Tables with one

leg only; Card tables; Camping tables; Table leaf.

• WARNING: Make sure that the table does not tip over

when the product is fastened and in use.

• The table top must have a minimum thickness of 19 mm

and a maximum of 90 mm.

• Do not fasten it to drawers or mobile parts of the table.

• Do not hang objects on the seat that may alter its stability.

• Do not fasten or lock the seat when the child is in it.

• Do not use the seat for more than one child at a time.

• Always supervise children playing near the seat.

CARE AND MAINTENANCE

• This product requires periodical maintenance.

• The cleaning and maintenance operations must only be

carried out by an adult.

• Periodically check the hook on chair to see if it is broken,

damaged or has missing parts: If this is the case, do not

use it.

• Dry the metal parts to prevent the formation of rust.

• Periodically clean the space between the rotating plastic

part and the xed plastic part of the seat with a tooth-

brush to remove any food residues.

• Please refer to the care label for instructions on cleaning

the fabric.

Hand wash

Do not bleach

Do not tumble dry

Do not iron

Do not dry clean

COMPONENTS

A - Chair seat (gure 1)

B - Rotating part of the chair (gure 1)

C - Fixed part of the chair (gure 1)

D - Rotating handle (gure 1)

E - F - Arms (gure 2)

G - Rear fastening pins (gure 2)

GG - Rear joint buttons (gure 2)

GGG - Rear joint screws (gure 2)

H - Front fastening pins (gure 2)

HH - Front joint buttons (gure 2)

I - Non-slip plastic tips

ASSEMBLY

1. Remove the product from the mesh bag.

2. Connect the two arms (E, F) to the seat structure. Insert

one arm at a time into the tube of the structure as shown

in Figure 3, making sure that the two pins in the tube of

the structure have exited completely through the holes

in the arm (E-F). An audible click indicates that they were

inserted correctly (see gure 4). Warning: to make assem-

bly easier, there is a marking on one of the two arms and

on one of the tubes of the structure to indicate that these

two parts must be assembled together. Repeat the oper-

ation for the other arm.

USE

3. To fasten the chair to the table, turn the joint screws

(GGG) clockwise as indicated by the symbols on the

screws themselves, see gure 5.

4. Press the buttons on the joints (GG - HH), gure 6, until

the pins are completely lowered. Incline the seat, lifting

the rear part, and position it on the table surface (gure

7). Push the seat in fully.

5. Push up the four pins (G-H) until they come into contact

with the bottom surface of the table (gure 8).

6. Make the nal adjustment by turning the screws (GGG)

COUNTERCLOCKWISE until the seat is properly fastened

(gure 9). At this point, check that the non-slip plastic

tips (I) adhere completely with the table surface. If they

do not adhere perfectly, continue turning the fastening

screws (GGG), always counterclockwise, until the non-

slip plastic tips adhere completely with the table surface.

Check the seal by trying to pull the seat outwards. At this

point, the seat is ready to be used.

USING THE SAFETY HARNESS

7. Remember to always fasten the safety harness, making it

pass through the plastic “D” rings (gure 10). After placing

the child in the seat, fasten the plastic buckle as shown

in gure 11. Make sure it is correctly positioned and cor-

rectly fastened.

SEAT ADJUSTMENT

The position of the seat can be selected.

HOOK ON

CHAIR

8. To adjust the seat position, lift the handle (D) located on

the backrest of the seat by extracting the pin from the

tube (gure 12), and turning the chair seat in a clock-

wise or counterclockwise direction (gure 13) until the

360° symbol located on the rotating part of the seat (B)

is aligned with the selected symbol located on the xed

part of the chair seat (C). Once the indicated position is

reached, release the rotation handle so that the locking

pin engages in the hole in the tube: an audible click indi-

cates that the pin engaged correctly.

The chair has six positions:

- 1 “FEEDING BOTTLE” position (gure 14 and gure 14a),

2 “BISCUIT” positions (gure 15 and gures 15a/15b): the

360° indicator is positioned in correspondence of the

“FEEDING BOTTLE/BISCUIT” symbol on the tube of the seat

(C). the child is facing outwards and is able to drink from

the feeding bottle or eat a snack independently, always

keeping the visual contact with his mum, who is able to

move freely in the surrounding area.

- 2 “CUP” positions (gure 16 and gures 16a/16b): the 360°

indicator is positioned in correspondence of the “CUP”

symbol on the tube of the seat (C). The moment of wean-

ing is experienced with the correct contact between the

child and his mum. The child is able to pick up the cup lo-

cated on the table on his own while the mother is able to

be in a correct position near her child while feeding him.

- 1 “CUTLERY” (gure 17 and gure 17a): the 360° indicator

is positioned in correspondence of the “CUTLERY” symbol

on the front part of the xed structure (C). Once the child

has acquired greater autonomy, he faces towards the ta-

ble and is able to enjoy being at the table together with

his mum and dad.

WARNING! do not adjust the seat to a position of use other

than those indicated in this instruction booklet. The seat

must never be adjusted while the child is sitting in it. In this

case it can be slightly more dicult.

WARNING! While adjusting the seat, make sure that the

child's legs can freely follow the movement of the seat.

HOW TO REMOVE THE FABRIC COVER

The cover of the hook on chair can be removed for washing.

9. Unfasten the safety harness and remove it from the plas-

tic ”D” rings.

10. Unfasten the 4 snap buttons integrated in the fabric

(gure 18a and 18b).

11. Remove the plastic “D” rings, making them pass through

the openings in the seat fabric.

12. Remove the two rear metal hooks of the seat, making

them pass through the seats in the backrest and the

three metal front hooks through the seats along the

front edge of the seat (gure 19a and 19b). At this point,

the fabric can be removed.

13. Unfasten the snap button located on the seat (gure 20)

and remove the HDPE insert.

To recover the chair, proceed as follows.

14. Insert the HDPE insert on the bottom of the chair and

close the snap button.

15. Insert the metal hooks through the specic seats and

make sure that they are correctly blocked as shown in

gure 21a and 21b.

16. Pass the plastic “D” rings through the openings in the

30° C

Chicco Tafelhangstoel 360 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info