Bedienungsanleitung Chicco Top Digital Audio Baby Monitor (Seite 31 von 220) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

500878

Zoom out

Zoom in

Vorherige Seite

1/220

Nächste Seite

- Periodically inspect mains adapters (1). If

the power cord or plastic parts show signs of

damage, do not use them and contact a qualified

technician.

- Do not leave mains adapters (1) plugged into

the outlet when devices are not in use and/or not

connected to the mains adapters (1)

2.2.2 Modes of use - Switching on and

Adjustment

Parent unit (primarily in receiver mode) parent

unit on/off in Baby Monitor mode

Press the on/off button (2) for about 3 seconds.

The parent unit (primarily in receiver mode) will

switch on in Baby Monitor mode.

The power and link indicator light (12) will begin

to flash green and the display (5) will show the

icon to indicate that the parent unit is attempting

to establish a connection with the baby unit.

Once connection has been established between

the 2 units, will be shown and the power and

link indicator light (12) will light up steady green.

Keep the button (2) pressed for 3 seconds until

the green power and link indicator (12) switches

off. The parent unit (primarily in receiver mode)

will switch off in Baby Monitor mode.

A prolonged beep will be heard when switching

the parent unit on and off in Baby Monitor mode.

Switching on/off the parent unit in Reminder

mode

Press the parent unit on/off button (2) for 1

second to switch on Reminder mode.

Note: keep the on button (2) pressed for no more

than 1 second; otherwise, the unit may switch on

in Baby Monitor mode.

Press the parent unit on/off button (2) again for 1

second to switch off Reminder mode.

A short beep will be heard when switching the

parent unit on and off in Reminder mode.

Volume adjustment + - of the parent unit

loudspeaker

The +,- volume adjustment buttons (6) regulate

the volume of sounds emitted by the baby unit

loudspeaker when the unit is in Baby Monitor

mode.

Press + and – (6) to regulate parent unit

loudspeaker (11) volume and select the desired

level.

The unit offers up to 10 volume setting levels. The

factory set volume level is 5.

Press the “+” button (6) to increase one level.

Press the “-“ (6) button once to decrease one

level.

The change in the volume level will

be shown on the display (5)

Note: The volume adjustment icon includes 5

notches: each notch lights up after 2 presses of

the +/- button (6).

A beep will be heard each time volume is

increased or decreased by a level.

A double beep will be heard each time the

maximum or minimum level is met.

Parent/baby unit communication Talk Function

The ‘talk’ function makes it possible for parents

to communicate with the child when the unit is in

Baby Monitor mode.

Press and hold the button (4) and talk near the

parent unit microphone (10).

When the talk function is on, it is not possible

to hear sounds from the baby unit on the parent

unit.

ATTENTION: when using the ‘Talk’ function, avoid

talking too close to the parent unit microphone

(10) or the baby unit will receive very high

intensity sounds.

ATTENTION: do not press the talk button (4)

when the two units are in the same room or are

less than 3 metres apart; doing so could cause

noises or a hissing sound.

Vibration Alarm function

This function is activated in Baby Monitor mode

from the internal parent unit menu.

When medium-high intensity sounds come

from the baby unit, the unit begins to vibrate,

allowing the parent to be notified when the level

of loudspeaker (11) volume on the parent unit is

set to a minimum.

When this function is set, the icon is shown

on the display.

For setting details, see Paragraph 3.2.1.

Voice Activation function

In Baby Monitor mode, the parent unit can

operate in continuous transmission mode or in

voice activation mode.

The Voice Activation function is activated from

the internal parent unit menu.

The parent unit loudspeaker (11) interrupts the

reproduction of any sounds emitted from the

child that are below the factory set default voice

activation threshold, while all sounds above the

threshold are reproduced.

When this function is set, the icon is shown

on the display.

For setting details, see Paragraph 3.2.2.

Reminder Setting

To help organise the family’s days, it is possible

to set 5 acoustic reminders for meals, fever

measuring, medicine, diaper change and sleep

from the internal parent unit menu. This function

is available both when the unit is in Baby Monitor

or Reminder mode.

When reminders are set, the display shows the

relative icons

For setting details, see Paragraph 3.2.4.

After activation of each reminder, a countdown

starts until a warning beep is heard relative to the

reminder expiry. The beep is also accompanied on

the display by a flashing relative reminder icon.

The beep will last 10 seconds followed by a

5 minutes pause, during which the icon will

continue to flash on the display.

This cycle will continue until the reminder is

deactivated via pressing the button (7).

Luminous and acoustic operating status

indicators:

· The power and link indicator light (12) supplies 3

different pieces of information:

- Indication that the device is on in Baby Monitor

mode and properly connected to baby unit:

the indicator light (12) will light up steady green.

- Indication of loss or absence of link with the

baby unit during operation in Baby Monitor mode:

the indicator light (12) lights up green, starts to

flash and the display (5) shows the icon and,

after 1 seconds, 2 consecutive beeps per second

Chicco Top Digital Audio Baby Monitor Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info