Bedienungsanleitung Chicco Top Digital Audio Baby Monitor (Seite 33 von 220) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

500878

Zoom out

Zoom in

Vorherige Seite

1/220

Nächste Seite

Allows parents to monitor sounds emitted by the

child even when the parent unit (11) loudspeaker

volume is switched off.

: the central LED lights up if

sounds emitted by the child are of a relatively

low intensity.

: 3 LEDs light up if sounds

emitted by the child are of medium intensity.

: 5 LEDs light up if sounds

emitted by the child are of a relatively high

intensity.

Display of Temperature detected by the baby

unit sensor

In Baby Monitor mode, the parent unit display (5)

will show the temperature detected by the baby

unit sensor (9).

Under 16° and over 26°, the numbers related

to measured temperature will begin to flash. In

this case, it is recommended to set the correct

temperature level in the child’s room.

Headphones

It is possible to use the supplied headphones (20)

to listen to sounds emitted from the child from

the parent unit. To activate this listening mode,

simply connect the headphone (20) jack to the

audio output (17) on the base of the parent unit.

3.Parent unit internal Menu Management in

Baby Monitor mode

3.1 Accessing the main menu

The parent unit includes a navigation menu,

through which it is possible to set up, activate and

deactivate the parent unit in Baby Monitor mode.

The features included are:

· Vibration Alarm

· Voice Activation Function

· Date and Time setting

· 5 Reminders

Press the button (7) to access the main menu and

choose the functions you are interested in using

by pressing the navigation buttons (8-9).

To confirm set functions and access secondary

menus, press button 7.

Settings saving will be shown on the display with

the appropriate icon.

To exit from the main menu, press the navigation

buttons (8-9) until the icon is shown and

press the button (7) to confirm.

Note: If while browsing the main menu and all

secondary menus, no button is pressed within

6 seconds, you will automatically exit from the

menu without saving any settings and the display

(5) will show the icons relative to settings made up

until that time (see paragraph 1.4).

3.2 Setting functions

3.2.1 Vibration Alarm function

Activation

Access the main menu pressing button 7. The

Vibration alarm icon will begin to flash on the

display (5). To confirm the your selection, press

button 7.

The possibility to select between “ON”, (“ON”

flashes if this function was previously set) and

“OFF” (“OFF” flashes if this function was not

previously set) will appear on the display. To set

the function, select “ON” with the navigation

buttons (8-9) and confirm with button 7. You will

automatically exit from the menu. The display (5)

will show the operating icon and you will feel

a short vibration on the unit.

Deactivation

Access the main menu via the button (7).

The Vibration alarm icon will begin to flash on the

display (5). Confirm selection with the button (7).

The possibility to select between “ON”, (“ON”

flashes if this function was previously set) and

“OFF” (“OFF” flashes if this function was not

previously set) will appear on the display. To

deactivate the function, select “OFF” with the

navigation buttons (8-9) and confirm with

button (7). You will automatically exit from the

menu. The operating icon on the display will

disappear (5).

Note: If during navigation within the Vibration

Alarm menu, you decide to exit and return to the

main menu without saving any settings, press the

navigation back button (9) for about 2 seconds.

3.2.2 Voice Activation function

Activation

Access the main menu via the button (7). The

Alarm icon will begin to flash on the display (5)

Press the navigation forward button (8) until the

icon flashes. Confirm the your selection by

pressing the button (7).

The possibility to select between “ON”, (“ON”

flashes if this function was previously set) and

“OFF” (“OFF” flashes if this function was not

previously set) will appear on the display. To set

the voice activation function, select “ON” with the

navigation buttons (8-9) and confirm with button

(7). You will automatically exit from the menu (5).

The operating icon on the display will appear. .

Deactivation

Access the main menu via the button (7).

The Alarm icon will begin to flash on the display

(5)

Press the navigation forward button (8) until the

icon flashes. Confirm the your selection by

pressing the button (7).

The possibility to select between “ON”, (“ON”

flashes if this function was previously set) and

“OFF” (“OFF” flashes if this function was not

previously set) will appear on the display. To

deactivate the function, select “OFF” with the

navigation buttons (8-9) and confirm with button

(7). You will automatically exit from the menu.

The operating icon on the display (5) will

disappear.

Note: If during navigation within the Voice

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chicco Top Digital Audio Baby Monitor Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info