Bedienungsanleitung Christopeit CPS2 (Seite 16 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

662743

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Step 7:

Installation of the computer (39) on the computer bracket of the

handlebar support (25).

1. Push the plug of the computer cable harness (54) into the appropriate

socket of the computer (39). Push the plugs of the pulse measuring

unit (44) into the appropriate sockets of the computer and push the

computer onto the computer bracket.

(Note: when pushing on the computer, ensure that the cable harnesses

are not trapped. Insert the necessary batteries (2xMignon 1.5V AA) in

the battery compartment located on the rear of the computer.)

Step 8:

Checks

1. Check the correct installation and function of all screwed and plug

connections.

Installation is thereby complete.

2. When everything is in order, familiarise yourself with the machine at a

low resistance setting and make your individual adjustments.

Note:

Please keep the tool set and the instructions in a safe place as these may be

required for repairs or spare parts orders becoming necessary later.

Computer instructions for 9912

The supplied computer allows the most convenient training. Every value

relevant to training is displayed in the window.

From the beginning of the training session, the required time, the current

speed, the approximate calory consumption, the travelled distance ad the

current pulse rate are displayed. All values are counted from zero upwards.

The computer is switched on by briefly pressing the F key or simply by

beginning training.

To start the computer, simply begin training. The computer begins to register

and display all values.

To stop the computer, just stop training. The computer stops all measure-

ments and retains the last attained values. The last attained values in the

functions TIME, CALORIES and KM are stored and training can continue

with these values when training is resumed.

The computer switches of automatically approx. 4 minutes after training is

stopped. All previously attained values are deleted.

Displays:

With the “F” key, the individual functions can be selected and the associated

data displayed in the window. The selected function is indicated by an icon

in the window beside the printed name of the function.

1. “PULSE” display:

The current pulse rate is displayed in beats per minute. Particular values

cannot be specified.

The values last attained by this function are not stored.

(Limit of both displays: 240 pulse beats per minute.)

(Note: For pulse measurement, the two contact surfaces of the pulse

measuring handle unit (19) must be gripped simultaneously. The contact

surfaces should be located centrally in the palms of the hands.

2. “TIME” display:

The currently required time is displayed in minutes and seconds. A particu-

lar value cannot be specified.

The values last attained by this function are not stored.

(Limit of the display: 99.59 minutes.)

3. “KM/H” display:

The current speed is displayed in kilometres per hour. A particular value

cannot be specified.

The values last attained by this function are not stored.

(Limit of the display: 99.9 km/h.)

4. “CALORY” display:

The current status of the consumed calories is displayed. A particular value

cannot be specified.

The values last attained by this function are not stored.

(Limit of the display: 999,9 calories.)

5. “KM” display:

The current status of the travelled distance is displayed. A particular value

cannot be specified.

The values last attained by this function are not stored.

(Limit of the display: 999,9 km.)

6. “SCAN” function:

If this function is selected, the current values of all functions are displayed

successively in a constant sequence approx. every 5 seconds.

Key functions:

1. “F” key

By pressing this key once briefly, it is possible to change from one function

to another. The associated values are then displayed in the window.

If the key is held longer (approx. 3 seconds), all last attained values are

deleted with the exception of the values in the “KM TOTAL” display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Christopeit CPS2 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info