Bedienungsanleitung Christopeit CXT 7200 (Seite 22 von 32) (Deutsch, Englisch)

793034

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite



When turned on, the display with emit 3 beep sounds as all LCD dis-

plays light up. Aer that, you can choose the user U0-U3. You can en-

ter personally data for 4 dierent persons. User data U1-U3 will keep

in memory, but U0 data will not keep in memory, so only for guest use.

If you have already entered the personally data, choose your user pro-

le and start your exercise by press a desired program-key.



To enter personally data choose one of the user prole U1-U3 and en-

ter with pressing “F”-key. The text window will display “SLECT AGE”

3 seconds, meanwhile “20” will ash so Age can be adjusted using

“+” or “–“ -key, press “F”-key to save value & move to next data. The

text window will display ‘SELECT GENDER” 3 seconds, meanwhile of

„Female„ will ash so Gender can be adjusted using “+” or “–“ -key,

press “F”-key to save gender & move to next data. The text window will

display “SELECT WEIGHT” 3 seconds, meanwhile “ 70” of Weight will

ash so weight can be adjusted to use “+” or “–“ -key, press “F”-key to

save value & move to next data. The text window will display “SELECT

HEIGHT” 3 seconds, meanwhile “ 175 “of Height will ash so Height can

be adjusted to use “+” or “–“ -key, press “F”-key to save value



Aer power-up and choosing a user prole (U0-U3) use one of the

PROGRAMM keys to select your favorite exercise program. Then the

text window will display the desired program by scrolling 3 seconds.

 The language of scrolling text window you can change into

German or English language by pressing + and – key at the same me

for 3 seconds.

 When there is no signal or data input for 4 minutes, the machine

will enter sleep mode. Pedaling the machine or key selecon will wake-

up the computer.



Workout can be break by pressing “L/Pause”- key. Workout will con-

nue when “L/Pause”- key is pressed again.



Quick Start- (SCHNELLSTART), Manual- (MANUELL), User-(INDIVIDU-

AL), Interval- (INTERVALL), Wa- (WATT), HRC- (ZIELPULS), Test- (TEST),

BMI-BMR-FAT- (BMI-BMR-FETT), Mountain- (BERG) program. Aer that

the text window will display „Start Pedaling“ (TRETEN BEGINNEN) or

„Press Mode“ (Modus Drücken) press “F”- key to set data by scrolling,

it will be varied depend on dierent programs.





To input desired value or workout mode. May advance ashing prompt

to next parameter or mode for selecon.



Break & Resume workouts. (A stop icon will show during break situa-

on.) Back up to the previous prompt during data entry. Operates only

when in pause mode. Holding key for 3 seconds will reset computer to

power-up condion.



Decrease value of selected workout parameter: TIME, DISTANCE, etc.

During the workout, it will decrease the resistance load.



Increases value of selected workout parameter. During the workout, it

will increase the resistance load.



Aer selecng desired workout mode: Quick Start, Manual, User Pro-

gram, Interval Program, Wa Program, HRC Program, Test Program,

BMI-BMRFATT Program, Mountain Program may pre-set several work-

out parameters for desired results.



Aer workout or during workout press Test -key and Recovery Mea-

surement will start. Recovery is Fitness Level 1-6 aer 1 minute. (This

funcon exists only, if you did an exercise before with pulse measure-

ment.)

     



 Some parameters are not adjustable in certain programs.

Once a program has been selected, pressing “F”- key, the text window

will display “Select Time” 3 seconds then display “PRESS MODE TO AC-

CEPT” (Modus Drücken). At the same me “0:00“of me parameter

will ash. Using “+” or “–“ - key you may select desired me value.

Press “F”- key to input value. Flashing prompt will move to the next pa-

rameter. Connue use of Connue use of “+” or “–“ - key to select de-

sired value then press “F”- key to input value. Aer nished of seng

workout parameters, the text window will display “START PEDALING”

(Treten beginnen) by scrolling. User can start the workout by starng

pedaling.





    

 0:00~99:00 00:00 +/- 1:00 1. When display is 0:00, me will count up.

2. When me is 10:00-99:00, it will count down to 0.

 0:00~99:90 0.00 +/- 0.1 1. When display is 0:00, distance will count up.

2. When distance is 0.00~99.90, it will count down to 0.

 0~9995 0+/- 5 1. When display is 0:00, kilojoule will count up.

2. When kilojoule is 5~9995, it will count down to 0.

 20~400 20/100 +/- 5 WATT value can be set only in Wa/Test program.

 40~220 90 +/- 1 When heart rate exceeds set range, user will be alerted.

Level prole/Fitness level

RPM or km/h

Distance KM

Wa or Level

L...1,2,3

Kilojoule

Informaons

Display

Time and Stop

Age/Gender

Weight/Height

BMI or Fat

Pulse or BMI

Christopeit CXT 7200 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info