Bedienungsanleitung Christopeit EMT 2200 (Seite 21 von 28) (Deutsch, Englisch)

793190

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite



The whole set of heart rate detector include 2 sensors each side. Each

sensor has 2 pieces of metal parts. The correct way to get detected is

to gently hold both metal parts each hand. With the good signals pi-

cked up by the computer, the heart mark in the HEART RATE Display

shall ash. Somemes the heart rate value is not useable, based on

wet hands or any other contact problems during exercising. If you need

high accuracy heart rate value you have to use an external heart rate

measurement with a pulse belt.



For pulse measurement, the pulse measuring unit 9309 must be in pla-

ce. The use of the pulse measuring unit makes it possible for you to

accurately monitor your own training programme by exact, real-me

measurement of your heart rate. The installaon of the system is very

simple and easily done.

The pulse measuring unit was developed especially for use with this

machine. The user puts on the unit and the transmier of the unit re-

gisters the ECG signals of the heart. The transmier amplies the ECG

signals and transmits them in the form of radio signals to the receiver

installed in the computer.

The transmier switches on automacally when the pulse measuring

unit is put on and the rear of the pulse measuring unit have made con-

tact with the breast. Any kind of normal training clothes may be worn

over the pulse measuring unit. The receiver installed in the computer

receives the signals from the transmier and transfers these in the

form of electrical impulses to the computer. The computer processes

the signals and displays them as pulse beats per minute on the display.

To aain an opmum performance of the pulse measuring unit, the

machine should be set up for training in such a manner that it is as far

as possible from all high-voltage power lines, electric motors and other

sources which can cause interference. Adjust the strap to your chest

measurement and put on the enre unit as depicted in the illustraon.

Ensure that the strap is not too loose and that the transmier is loca-

ted at the centre of your chest. The unit and thereby the pulse measu-

ring system is then installed and ready for use.

Clean the pulse measuring unit aer each training session with a cloth

moistened with a soap soluon and then with a cloth moistened with

pure water. This prevents the accumulaon of sweat which could lead

to inaccurate measurements.

If you noce during training that the values which must be displayed by

the computers appear irregularly or the symbol “P” appears in the dis-

play, conduct the following check procedure:

 Check that the strap is not too loose and/or has slipped too far dow-

nwards.

 Check whether the Christopeit-sport Brand on the transmier of the

pulse measuring unit is posioned correctly and is legible to a person

looking at the person in training.

 Ensure that the computer is switched on.

Moisten the part of the strap neat the transmier and which comes

into contact with the skin lightly with water to improve the transmis-

sion.

 Check whether the baery in the transmier is spent and change

this if necessary.

Remove and replace the baeries.









 Heart rate monitoring system may be inaccurate. Over

exercise may result in injury or death. If you feel faint stop exercising

immediately.



It is a funcon to check the condion of pulse recovery that is scaled

from 1.0 to 6.0 while 1.0 means the best and 6.0 means the worst and

the increment is 0.1. In order to get rated correctly, users must test it

right aer the workout nished by pressing „TEST“ key and then stop

exercising. Aer the key is pressed, please also apply the heart rate de-

tector appropriately. The test will last for 1 minute and the result will

show in the display.

RPM and Power in Wa of Level 1 - Level 24 for EMT 2200

Art.-Nr. 2098



The power consumpons (Wa) are adjusted by measuring the dri-

ving speed (min-1) of axle and the braking torque (Nm).

Your equipment was tested to fulll the requirements of its accuracy

classicaon before shipment, If you have doubts about the accuracy,

please contactwith your local retailer or send it to accredited test labo-

ratory to ensure or calibrate it.

(Please note that a deviaon tolerance as noted on page 15, is permis-

sible.)





Level 20RPM

WAT T

30RPM

WAT T

40RPM

WAT T

50RPM

WAT T

60RPM

WAT T

70RPM

WAT T

80RPM

WAT T

18 14 23 33 43 58 73

2 9 16 27 39 52 69 86

310 19 31 45 61 81 100

411 22 36 52 70 93 115

5 12 25 40 59 80 106 131

6 13 27 45 68 90 119 147

7 14 29 49 75 100 132 163

8 16 32 54 82 110 145 180

917 35 59 89 120 158 196

10 18 38 63 95 130 171 212

11 19 41 68 102 140 184 228

12 21 44 74 110 150 198 245

13 23 47 78 117 160 211 262

14 24 49 82 124 170 224 279

15 25 51 86 131 180 238 296

16 26 54 90 138 190 251 313

17 27 57 95 146 200 265 330

18 28 59 100 153 210 278 346

19 29 62 105 160 220 291 362

20 31 65 110 167 230 304 378

21 32 67 115 174 240 317 394

22 33 70 119 181 250 330 410

23 34 73 123 189 260 344 426

24 36 76 128 197 270 358 443



During body fat test, it will display Err2 if hand pulse sensors get no-

input.

According to test result, 10 seconds have no operaon or operaon

arbitrarily key, will get into system recommendaon to toughen pro-

gram.

Christopeit EMT 2200 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info