Bedienungsanleitung Ciclo CM 628 Master (Seite 10 von 16) (Englisch)

588917

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

5. FUNCTIONS

The individual primary functions can be called up by short

pressing of the right or left button, one after each other.

Through pressing the right button for 3 sec., the first sub-

function is called up in each case and, through subsequent

short pressing of the right button, further sub-functions

appear.

In travel operating mode, the instantaneous speed is

displayed simultaneously with all functions above in the

display.

All functions (except for stopwatch and time) have an

automatic start/stop in the travel operating mode (if the

CM 628 is located on the handlebar bracket), i.e. the

measurement starts shortly after the first wheel (or pedal)

rotational motion and ends a few seconds after the last

wheel (or pedal) rotational motion.

The sub-functions of the heart rate (average/maxi-

mum heart rate, calorie consumption, fat burn in %

and times within/without the set limits) are only

calculated when the stopwatch is running.

The daily values for the respective bike are reset to zero

through simultaneous pressing of both buttons for 3 sec.

(best done directly before beginning a new tour). The

indication 'Reset' will appear in the display for a short

period.

This reset does not work in the stopwatch function. There

only the stopwatch (and with this the sub functions of the

heart rate) are reset by pressing both buttons for 3 sec.

The total values can be deleted through a total reset (press

AC button on the reverse side for 3 sec. - all adjustments

and the transmitter initialisations are then also deleted) or

through battery removal for a longer period.

The individual functions and their meanings are

explained in the text below.

(To better distinguish the primary functions from the sub-

functions, the primary functions are printed in bold text

while sub-functions in bold, italic text.)

Current speed (SPD)

Indicates the current speed in km/h (or mph = miles per

hour) and is always displayed with all primary functions in

the upper display. In this case, the arrows (to the left in the

display) indicate whether the travel speed is faster (▲) or

slower (▼) than the instantaneous average speed. If both

arrows are displayed, the travel speed is in the range of the

instantaneous average speed.

Range: 0 - 999 km/h or 624 mph (depending on the

adjusted wheel circumference).

The display shows the speed up to 200 km/h or mph with

a decimal place, above that without a decimal place (in this

case, the third location is then displayed to the right above,

where the decimal place is normally located).

If " –– " is indicated in the display,

this means that no active speed

transmitter has been found. The

automatic transmitter search is

started through the insertion of the

CM 628 into the handlebar bracket

and then a zero flashes in the upper

display.

The display again returns to " – ",

this means that no transmitter has

been found. Then rotate the wheel once slowly (in order to

switch on the transmitter) and start the transmitter search

again by small movement of the bike or manually by

pressing both buttons for 3 sec.

Daily kilometers (DST)

Indication of the kilometers travelled

up to now.

Range: 0 - 999.99 km or 624.99

miles

Sub-functions:

1. Actual daily kilometers

Sub-function of the function daily

kilometers.

If the daily kilometers were changed

in the basic setting, the daily

kilometers actually travelled are

displayed here. The symbol of the

respective bike appears in the

display in this case.

If the daily kilometers were not

changed, the sum of the daily

kilometers of Bike 1 and Bike 2 is displayed (➀ and ➁ in

SPD

km/h

SPD

km/h

02 CM 628 englisch 34-65 19.05.2005 10:23 Uhr Seite 20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo CM 628 Master Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo CM 628 Master

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info