Bedienungsanleitung Ciclo HAC 4000 (Seite 11 von 15) (Englisch)

588930

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Maximum altitude

Sub-function of function ‚Current altitude‘

Indicates the maximum altitude reached

(or set) during the current tour.

Range: -200 to 9000 m resp.

2952 ft x10

Current heart rate

Indicates the current heart rate.

Range: 30 to 240 bpm

Training time below the lower heart rate

limit

Sub-function of the function

‚Current heart rate‘.

Indicates the training time during which the

heart rate was below the lower limit set. The

upper display indicates the set heart rate limit

with a symbol (t), the lower display indicates the measured time.

Training time within the heart rate limits

Sub-function of the function

‚Current heart rate‘.

Indicates the training time during which the

heart rate was within the set limits. The upper

display indicates the symbol ’ ’ the lower

display indicates the measured time.

Training time above the upper heart rate

limit

Sub-function of the function

‚Current heart rate‘.

Indicates the training time during which the

heart rate was above the upper limit set. The

upper display indicates the set heart rate limit

with a symbol (s), the lower display indicates the measured time.

Current calorie consumption

Sub-function of the function

‚Current heart rate‘.

Indicates the current calorie consumption.

Range: 0 – 999999 kcal (the 6. position is

shown on the decimal point of the upper

display)

Total calorie consumption

Sub-function of the function

‚Current heart rate‘.

Indicates the total calorie consumption.

Range: 0 – 999999 kcal (the 6. position is

shown on the decimal point of the upper

display)

Current performance

(only in bike mode)

Indicates the current performance in Watt.

Range: 0 - 9980 W (in steps of 20 W)

Average performance

(only in bike mode)

Sub-function of function

‚Current performance‘.

Indicates the average performance in Watt of

the current tour.

Range: 0 - 9980 W (in steps of 20 W)

Maximum performance

(only in bike mode)

Sub-function of function

‚Current performance‘.

Indicates the maximum performance in Watt of

the current tour.

Range: 0 - 9980 W (in steps of 20 W)

Note: The indicated performance values are approximate.They are

calculated under the assumption of an average friction, wind-speed,

good surface-nature of the street and the set total weight. The per-

formance can be calculated more exactly when ascending (accuracy

+/- 20 W; with strong wind deviations are larger).

On a level route, average values are indicated (accuracy approx. 40

W). During descents the display indicates zero.

Daily kilometres

(only in bike mode)

Indicates the current distance travelled (in kilo-

metres or miles).

Range: 0,00 - 999,99 km resp. 621,36 mi (in

the display the comma is shown as a colon)

Actual daily kilometres

(only in bike mode)

Sub-function of function ‚Daily kilometres‘.

If the daily kilometres were changed in the ba-

sic setting, the daily kilometres actually travelled

are indicated here. If the daily kilometres were

not changed, the sum of the daily kilometres of

bike 1 and bike 2 is indicated.

Range: 0,00 - 999,99 km resp. 621,36 mi (in the display the comma

is shown as a colon)

Total kilometres

(only in bike mode)

Sub-function of function ‚Daily kilometres‘.

Indicates the total distance travelled.

Range: 0 - 99999 km resp.. 62136 mi

Sum of the total kilometres

(only in bike mode)

Sub-function of function ‚Daily kilometres‘.

Indicates the sum of the total distance travelled

of bike 1 and bike 2.

Range: 0 - 99999 km resp. 62136 mi

5.3 General functions

Heart rate automatic

If the HAC 4000 does not receive a signal from the transmitter belt

within 5 minutes (e.g. transmitter belt or receiver are out of range ),

the heart rate receiver of the HAC turns automatically off

(symbol ’ ’ disappears in the display). The receiver turns on, when

the function ‚current heart rate‘ is chosen again in the display.

Light/Light manager

By pressing LL-button 4 sec. the light is switched on for 5 sec.

By pressing LL-button 6 sec. the light manager is activated. I.e. in

the next 8 hours light is switched on for 5 sec. automatically with

every button press.

To deactivate the light manager press again LL-button 6 sec.

Note: Light requires a lot of battery power, so if you use it very often,

battery life will be reduced.

Batterie low

Countdown

Wecker

HF Alarm

Bargraph

Stromsparmodus

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 4000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info