Bedienungsanleitung Ciclo HAC 5 (Seite 32 von 38) (Englisch)

588931

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

In case the heart rate and cadence intervals (with or without the time manager) are used, a second

countdown 2 is initiated automatically after the alarm signal. If this countdown is completed, a short

alarm can be heard and countdown 3 is initiated. After the completion of these countdowns the count-

down starts from countdown 1 again (depending on the preset countdown counter). This lasts as long

as the countdown counter is executed. The countdown can be paused or stopped by pressing the

UM-button again.

Pressing the

UM-button for 3 sec. resets the countdown to the countdown of countdown 1.

The countdown function is also used with the heart rate and cadence time manager (see chap. 8.2)

Autoscroll

Indicates automatically all values in a 3 sec. cycle in the lower display.

7.4 Basic Functions

Light

By pressing the LR-button for 4 seconds the light is turned on for approx. 5 seconds.

Automatic light on

By pressing the

LR-button for 6 seconds the automatic light is turned on. For the next 5 hours the light

will be automatically turned on for 5 seconds when pressing any button.

Automatic light off

By shortly pressing the LR-button and immediately afterwards for 6 seconds the automatic light

function is turned off.

Note: If the light manager is active, at pressing any button the light is turned on only and no function

is executed. While in light mode, you have to press the button again to activate any function. To turn

off the light manager, for example, shortly press LR (light is turned on) and immediately press LR for 6

seconds. So the light manager is turned off.

Attention: Light consumes a lot of battery power, frequent use shortens the life span of the battery

accordingly.

Alarm clock / Alarm

If the set alarm time is reached there is a sound for 20 seconds (switch off by pressing any button).

If the alarm timer is set in the lower left of the display, an alarm symbol will show up. You set and switch

the alarm on/off by the topical, see 6.1 or in the basic settings, see 6.5.

Heart rate alarm

You can switch the heart rate alarm on/off in profile settings (choose ‚Beeper on/off‘) or by pressing UL

for 3 seconds. In the display you see the symbol if the heart rate alarm is on.

If the heart rate alarm is switched on you hear a beep when exceeding the heart rate limit.

Power down mode

(power down mode, see main settings chapter 6)

Your HAC5 can be switch to power down mode which means it doesn’t display anything but keeps all

data stored (except for date and time). This is useful e.g. for battery change but also when the HAC5 is

not used for a longer period.

To set power down mode select in the main settings (press MR for 3 seconds) “powerdown” and

confirm by pressing MR. The display shows

Choose with LR/UR either “powerdown” or “no” and confirm by pressing MR.

To re-start the HAC5 simply press any button.

Autoscroll

Basic Functions

Light

Alarm clock / Alarm

Heart rate alarm

Stromspar-Modus

Lightmngr.

For 5 hours

Lightmngr.

Off

HR-Beep

Off

Powerdown

Really?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ciclo HAC 5 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ciclo HAC 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info