650695
28
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
Configuring the Network
Advanced Settings
Cisco SPA100Series Administration Guide 34
1
Port Setting (SPA122 Only)
Use the Network Setup > Advanced Settings > Port Setting page to set the ETHERNET
(LAN) port attributes.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page
with the saved settings.
MAC Address Clone (SPA122 Only)
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification
purposes. Some ISPs require that you register a MAC address in order to access the Internet. If
you previously registered your account with another MAC address, it may be convenient to
assign that MAC address to your ATA. You can use the Network Setup > Advanced Settings
> MAC Address Clone page to assign a MAC address that you previously registered with your
Service Provider.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page
with the saved settings.
Field Description
Flow Control Flow control is a mechanism that temporarily stops the
transmission of data on a port. For example, a situation might
arise where a sending station (computer) is transmitting data
faster than some other part of the network (including the
receiving station) can accept. The overwhelmed network
element will halt the transmission of the sender for a specified
period of time.
Choose Enabled to enable this feature, or choose Disabled to
disable this feature.
Default setting: Enabled
Speed Duplex Choose the duplex mode. You can select from Auto-negotiate,
10 Half, 10 Full, 100 Half and 100 Full. Cisco recommends
choosing Auto-negotiate to automatically select the appropriate
mode for the traffic. Use caution with other settings. Problems
can result if you choose a setting that is not appropriate for the
network devices.
Default setting: Auto-negotiate
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco Cisco SPA112 VoIP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info