650695
29
Zoom out
Zoom in
Vorherige Seite
1/136
Nächste Seite
Configuring the Network
Advanced Settings
Cisco SPA100Series Administration Guide 35
1
VPN Passthrough (SPA122 Only)
Use the Network Setup > Advanced Settings > VPN Passthrough page to configure VPN
passthrough for IPsec, PPTP, and L2TP protocols. Use this feature if there are devices behind
the ATA that need to set up IPsec tunnels independently. For example, a device may need to
use a VPN tunnel to connect to another router on the WAN.
By default, VPN Passthrough is enabled for IPsec, PPTP, and L2TP.
After making changes, click Submit to save your settings, or click Cancel to redisplay the page
with the saved settings.
Field Description
MAC Clone Click Enabled to enable MAC address cloning, or click Disabled
to disable this feature.
Default setting: Disabled.
MAC Address Enter the MAC address that you want to assign to your ATA. If
your computers MAC address is the address that you previously
registered for your ISP account, click Clone Your PC’s MAC.
Your computers MAC address appears in the MAC Address
field.
Default setting: the current MAC address of your ATA
Field Description
IPsec Passthrough Internet Protocol Security (IPsec) is a suite of protocols used to
implement secure exchange of packets at the IP layer. Click
Enabled to enable this feature, or click Disabled to disable it.
Default setting: Enabled
PPTP Passthrough Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-
Point Protocol (PPP) to be tunneled through an IP network. To
disable PPTP Passthrough, select Disabled. Default setting:
Enabled
L2TP Passthrough Layer 2 Tunneling Protocol is the method used to enable Point-
to-Point sessions via the Internet on the Layer 2 level. Click
Enabled to enable this feature, or click Disabled to disable it.
Default setting: Enabled
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cisco Cisco SPA112 VoIP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info