Bedienungsanleitung Clarion CMV1 (Seite 36 von 44) (Englisch)

580505

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

CMV1

English

2-2. Press the [ENTER] button.

3-1. Turn the [UP/DOWN] knob to select “On” or

“Off”.

3-2. Press the [ENTER] button.

3-3. When you set “On”, turn the [UP/DOWN]

knob to select as following order

LOW ↔ MID ↔ HIGH

3-4. Press the [ENTER] button to store the

setting.

3-5. Press the [RETURN] button to return to the

previous mode.

Notes:

• Manufactured under license from BBE Sound,

Inc.

• Licensed by BBE Sound, Inc. under one or more

of the following US patents: 5510752, 5736897.

BBE and BBE symbol are registered trademarks

of BBE Sound, Inc.

• During audio adjustment mode, if no operation is

performed for more than 10 seconds, this mode

can be cancelled and return to previous mode.

General Settings

● Setting the clock

Note:

• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the

boat’s battery or take out this unit, the clock is

reset. While setting the clock, if another button or

operation is selected, the clock set mode is

canceled.

● Adjusting the Dimmer, Bright, Color,

Contrast, and Hue level

Note:

• The Bright, Color, Contrast, and Hue settings can

be adjusted only when a video image is displayed

on the screen.

• And the Hue setting can be adjusted only the video

system is set to “NTSC”.

[DIMMER]:

Adjusts the panel brightness when the boat

lights are ON or OFF.

[BRIGHT]:

Adjusts the brightness of the display.

[COLOR]:

Adjusts the color saturation.

[HUE]:

Adjusts the tone of color (red is emphasized

or green is emphasized).

To change adjustment setting

1. Press the [ADJUST] button to switch to

the adjustment selection display.

2. Turn the [UP/DOWN] knob to select the

“item name”.

“Clock”

↔

“Monitor”

↔

(“Screen Size”)

↔

“NTSC/PAL” ↔ “Tel-Speaker” ↔

“Tel-Switch” ↔ “Title Scroll” ↔

“System Check” ↔ “Initialize” ↔

“DivX Resistration Code” ↔ “DivX URL”

* In the case of item names appearing with

the “

t” suffix after the item name, please

press the [ENTER] button to display the

setting value.

* The “Screen Size” can be set only in the

DVD/DivX/AUX/iPod video mode.

3. Turn the [UP/DOWN] knob to select the

“desired setting value”.

4. Press the [ENTER] button to confirm the

setting.

5. After completing settings, press the

[RETURN] button to return to the previous

mode.

2-1. Select “Clock”.

3-1. Press the [ENTER] button.

3-2. Press the [X] or [V] button to select the

hour, the minute or the clock format.

3-3. Turn the [UP/DOWN] knob to set the correct

time.

4-1. Press the [ENTER] button to store the time

into memory.

2-1. Select “Monitor”.

3-1. Press the [ENTER] button.

3-2. Press the [X] or [V] button to select

“DIMMER”, “BRIGHT”, “COLOR” or “HUE”.

3-3. Turn the [UP/DOWN] knob to adjust the

level.

Audio Settings

280PE3260E_EN.book Page 34 Tuesday, March 24, 2009 3:41 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CMV1 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CMV1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info