Bedienungsanleitung Clarion CZ102E (Seite 6 von 14) (Englisch)

473627

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

English

In any mode, press and hold [DISP] button to

enter system setup. Press [

, ] buttons

to select options, rotate the [VOLUME] knob to

adjust.

AF: ON/OFF

Rotate the [VOLUME] knob to choose AF ON or

OFF.

REG: ON/OFF

Rotate the [VOLUME] knob to choose REG ON

or OFF.

DX/LO (RADIO mode)

Rotate the [VOLUME] knob to choose radio

local or distant at RADIO mode.

• LO: Only stations with strong signal can be

received.

• DX: Stations with strong and weak signals

can be received.

AUX SENS (AUX mode)

Rotate the [VOLUME] knob to choose AUX

Input sensitivity LOW, MID or HIGH at AUX

mode.

SCRN SVR: ON/OFF

Rotate the [VOLUME] knob to choose SCRN

SVR (screen saver) ON or OFF.

SCROLL: ON/OFF

For track information that is longer than the

display panel:

When SCROLL is ON, the LCD will display

ID3 TAG information cyclely, e.g: TRACK-

>FOLDER->FILE->ALBUM->TITLE->ARTIST-

>TRACK->...

When SCOLL is OFF, the LCD will scroll the ID3

TAG information across the display, the default

System Setup

is TRACK, but user can adjust it to other ID3

TAG information by press [BAND] button.

REAR/S-W

Rotate the [VOLUME] knob to choose REAR

or S-WOOFER (SUB-WOOFER).

TEL-SW

Rotate the [VOLUME] knob to choose

MUTE, ON or OFF.

• MUTE:

The sound from this unit is muted during

telephone calls.

• OFF:

This unit continues normal operation even

when the cellular phone is used.

• ON:

You can listen to your telephone calls from

the speakers connected to this unit.

*When listening to your calls on your car

speakers, you can adjust the volume by

turning the [VOLUME] knob.

BEEP: ON/OFF

Rotate the [VOLUME] knob to choose button

beep sound ON or OFF.

RESET (ALL):

1. Select ”RESET”.

2. Press and hold the [VOLUME] knob to

reset.

3. Settings will be set to the default value.

4. The unit will be turned off automatically.

Note:

• When the [RESET] is selected and you

press and hold the [VOLUME] knob,

radio station frequencies, titles, and

other data stored in memory are cleared.

Press the [ ] button to enter sound effect

setting mode. First press shows current EQ.

Rotate the [VOLUME] knob to change the BEAT

EQ in this order:

OFF -> B-BOOST -> IMPACT -> EXCITE ->

CUSTOM

Audio Setup

Rotate the [VOLUME] knob to change the

CUSTOM setting, and press the [VOLUME]

knob,

the press [

] or [ ] button to select

it including: BAS-G -> BAS-F -> BAS-Q

-> MID-G -> MID-F -> MID-Q -> TRE-G ->

Select tuner as playing source

Press [SRC / ] button once or more to enter

RADIO mode.

Select the radio band

Press the [BAND] button on the panel to select

one radio band among FM1, FM2, FM3, MW

and LW.

Manual tuning

During manual tuning, the frequency will be

changed in steps.

Press the [

] / [ ] buttons on the panel to

select a higher / lower station.

Auto tuning

Press and hold the [ ] / [ ] buttons on

the panel to seek a higher / lower station.

To stop searching, repeat the operation above

or press other buttons having radio functions.

Note:

When a station is received, searching stops and

the station is played.

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

Radio Operations

1. Press the [PS/AS] button.

2. When a desired station is tuned in,

press the [PS/AS] button again to

continue receiving that station.

Note:

• Be careful not to press and hold the

[PS/AS] button for 1 second or longer,

otherwise the auto store function will

begin and the unit starts storing stations.

Auto store

Only stations with sufcient signal strength

will be detected and stored in the memory.

Press and hold the [PS/AS] button (1 sec.)

to start automatic station search.

To stop auto store, press other buttons

having radio functions.

Notes:

1. After auto store, the previous stored

stations will be overwritten.

2. The unit has 5 bands, such as FM1, FM2,

FM3, MW, LW. FM3 and MW, LW can

store by AS function. Each bands can

store 6 stations, CZ102E/CZ102ER/

CZ102EG can store 30 stations in total.

TRE-F, rotate the [VOLUME] knob to select a

value.

BAS-G / MID-G / TRE-G: (-7)- (+7)

BAS-F: 60 / 80 / 100 / 200

BAS-Q: 1.0 / 1.25 / 1.5 / 2.0

MID-F: 500 / 1K / 1.5K / 2.5K

MID-Q: 0.5 / 0.75 / 1.00 / 1.25

TRE-F: 10.0K / 12.5K / 15.0K / 17.5K

Press the [

] button, then press [ , ]

buttons to select USER preset including:

BALANCE -> FADER -> M-B EX -> LPF(low

pass lter) -> S-W VOL (Subwoofer Volume),

rotate the [VOLUME] knob to select a value.

BALANCE:LEFT 1-7->CENTER->RIGHT 1-7

FADER:FRONT 1-7->CENTER->REAR 1-7

M-BEX: ON/OFF

LPF: THROUGH/80/120/160

SUBW VOL: (-6)-(+6)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ102E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ102E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info