Bedienungsanleitung Clarion CZ102E (Seite 7 von 14) (Englisch)

473627

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

English

Radio Operations

Manual store

When one expected radio station has been

detected, press and hold number button 1-6 to

store it in the memory.

Recall the stored stations

Press one numeric button among 1 to 6 on the

panel to select the corresponding stored station.

Local seeking

When LOCAL seeking is ON, only those radio

stations with strong radio signal could be

received.

To select LOCAL function, press and hold

the [DISP] button on the front panel, then

press [

] button repeatedly until LO or

DX displays on the screen, and rotate the

[VOLUME] knob to select Local or Distant

mode.

Note:

The number of radio stations that can be

received will decrease after the local seeking

mode is ON.

Radio Data System Operations

Radio Data System

This unit has a built-in “Radio Data System”

decoder system that supports broadcast stations

transmitting “Radio Data System” data.

When using the “Radio Data System” function,

always set the radio to FM mode.

AF function

The AF function switches to a different

frequency on the same network in order to

maintain optimum reception.

* The factory default setting is ON.

1. Set to system setup by long pressing [DISP]

button.

2. Press the [

] or [ ] button to select

“AF”.

3. Rotate the [VOLUME] knob to select ON or

OFF.

• AF ON:

“AF” indicator appears in the display and AF

function turns on.

• AF OFF:

“AF” indicator disappears in the display and

AF function turns off.

REG (Regional programme)

function

When the REG function is ON, the optimum

regional station can be received. When this

function is OFF, if the regional station area

switches as you drive, a regional station for

that region is received.

* The factory default setting is ON.

Notes:

• This function is disabled when a national

station such as BBC R 2 is bei ng

received.

• The REG function ON/OFF setting is

valid when the AF function is ON.

1. Set to system setup by long pressing

[DISP] button.

2. Press the [

] or [ ] button to

select “REG”.

3. Rotate the [VOLUME] knob to select ON

or OFF.

Manually tuning a regional station

in the same network

This function is valid when the AF function is

ON and the REG function is OFF.

Note:

This function can be used when a regional

broadcast of the same network is received.

TA (Trafc Announcement)

In the TA standby mode, when a trafc

announcement broadcast starts, the trafc

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Trafc programme (TP)

automatic tuning is also available.

* This function can only be used when “TP”

appears in the display. When “TP” appears,

this means that the “Radio Data System”

broadcast station being received has trafc

announcement programmes.

Setting the TA standby mode

If you press the [TA] button, “TA” lights in the

display and the unit is set into the TA standby

mode until a trafc announcement is broadcast.

When a traffic announcement broadcast

starts, “TRAF INF” appears in the display. If

you press the [TA] button while a traffic

announcement broadcast is being received,

the traffic announcement broadcas t

reception is cancelled and the unit goes

into the TA standby mode.

Cancelling the TA standby mode

As “TA” lits in the display, press the [TA]

button. The “TA” in the display goes off and

the TA standby mode is cancelled.

PTY (Programme Type)

This function enables you to listen to a

broadcast of the selected programme type

even if the unit is on a function mode other

than radio.

* Some countries do not yet have PTY

broadcast.

* In the TA standby mode, a TP station

has priority over a PTY broadcast

station.

Selecting PTY

Press [MENU] button, then rotate the

[VOLUME] knob to select PTY type,

press the [VOLUME] knob, the unit begin

searching.

CD/MP3/WMA Operations

This unit can playback MP3/WMA

les

Notes:

• If you play a WMA file with active DRM (Digital

Rights Management), there will be no audio.

To disable DRM

(Digital Rights Management)

When using Windows Media Player 9/10/11,

click on Tool -> Options -> Copy music tab, then

under Copy settings, unclick the Check box for

copy protected music. Then, reconstruct les.

Personally constructed WMA files are used at

your own responsibility.

Precautions when creating MP3/

WMA le

Usable sampling rates and bit rates

1. MP3: Sampling rate 8 kHz-48 kHz,

BIT rate 8 kbps-320 kbps / VBR

2. WMA: Bit rate 8 kbps-320 kbps

File extensions

1. Always add a file extension “.MP3”,

“.WMA” to MP3, WMA file by using

single byte letters. If you add a file

extension other than specied or forget

to add the le extension, the le cannot

be played.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion CZ102E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion CZ102E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info