Bedienungsanleitung Clarion DB269RGMP (Seite 14 von 24) (Englisch)

35330

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

14 DB268RMP/BD269RMP/BD269RGMP

280-8302-00

English

Radio Operations

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

When you are in the step tuning mode, the

frequency changes one step at a time. In the

quick tuning mode, you can quickly tune the

desired frequency.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

2. Tune into a station.

● Quick Tuning:

Press and hold the [å] or [∂] button for 1

second or longer to tune in a station.

● Step Tuning:

Press the [å] or [∂] button to manually tune

in a station.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Pressing the corresponding

[DIRECT] button recalls the stored radio

frequency automatically.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

2. Press the corresponding [DIRECT] button to

recall the stored station.

∗ Press and hold one of the [DIRECT] buttons

for 1 second or longer to store that station into

preset memory.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of the [DIRECT] buttons

for 1 second or longer to store the current

station into preset memory.

Auto store

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

Notes:

• The only FM band that can store the stations will

automatically be stored in FM3.

• When the auto store is performed, the station

previously stored in the memory at that position is

overwritten.

• If there are fewer than 6 stations with good

reception, the stations previously stored at the

remaining [DIRECT] buttons are not overwritten.

• A station already stored in one of [DIRECT]

buttons cannot be stored in another [DIRECT]

buttons.

1. Press the [BND] button and select the

desired band (FM or AM (MW/LW)).

2. Press and hold the [ ] button for 1 second

or longer. The stations with good reception

are stored automatically to the preset

channels.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

Preset scan

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [ ] button.

2. When a desired station is tuned in, press the

[ ] button again to continue receiving that

station.

Note:

• Be careful not to press and hold the

[ ]

button

for 1 second or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DB269RGMP Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info