Bedienungsanleitung Clarion DB269RGMP (Seite 15 von 24) (Englisch)

35330

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

280-8302-00

DB268RMP/BD269RMP/BD269RGMP 15

English

RDS Operations

RDS (Radio Data System)

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS

data.

This system can display the name of the

broadcast station being received (PS) and can

automatically switch to the broadcast station

with the best reception as you move long

distances (AF switching).

Also, if a traffic announcement or programme

type is broadcast from an RDS station, no

matter what mode you are in, this broadcast is

received.

Additionally, if EON information is received, this

information enables automatic switching of other

preset stations on the same network and

interruption of the station being received with

traffic information from other stations (TP). This

function is not available in some areas.

When using the RDS function, always set the

radio to FM mode.

• AF : Alternative Frequency

• PS : Programme Service Name

• PTY : Programme Type

• EON : Enhanced Other Network

• TP : Traffic Programme

∗ RDS interrupt does not function during AM radio

reception.

Manually tuning a regional station

in the same network

1. This function is valid when the AF function is

ON and the REG function is OFF.

Note:

• This function can be used when a regional

broadcast of the same network is received.

2. Press any one of the [DIRECT] buttons to

call out the regional station.

3. If the reception condition of the called out

station is bad, press the [DIRECT] button of

the same number. The unit receives a local

station on the same network.

TA (Traffic Announcement)

In the TA standby mode, when a traffic

announcement broadcast starts, the traffic

announcement broadcast is received as top

priority regardless of the function mode so you

can listen to it. Traffic programme (TP)

automatic tuning is also possible.

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

RDS broadcast station being received has traffic

announcement programmes.

● Setting the TA standby mode

If you press the [TA] button when only “TP” is lit

in the display, “TP” and “TA” light in the display

and the unit is set into the TA standby mode

until a traffic announcement is broadcast. When

a traffic announcement broadcast starts, “TRA

INFO” appears in the display.

If you press the [TA] button while a traffic

announcement broadcast is being received, the

traffic announcement broadcast reception is

cancelled and the unit goes into the TA standby

mode.

● Cancelling the TA standby mode

With “TP” and “TA” lit in the display, press the

[TA] button. The “TA” in the display goes off and

the TA standby mode is cancelled.

∗ If “TP” is not lit, pressing the [TA] button searches

for a TP station.

● Searching for a TP station

When “TP” is not lit, if you press the [TA] button,

“TA” in the display lights and the unit

automatically receives a TP station.

Note:

• If a TP station is not received, the unit continues

the search operation. Pressing [TA] button again

goes off “TA” in the display and stops TP station

searching.

RDS mode adjustment

Press and hold the [TA] button for 1 second or

longer to select the RDS mode.

The mode switches as follows each time the

[å] or [∂] button is pressed:

PTY ON PTY-S<E>

∗∗

∗

AF ON REG

∗∗

∗

....

Press [TA] button to exit RDS mode.

Notes:

•

∗

“PTY-S<E>” only available when “PTY ON”.

•

∗

“REG ON” only available when “AF ON”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DB269RGMP Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info