Bedienungsanleitung Clarion DUB278RMP (Seite 16 von 36) (Englisch)

580525

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

English

DUB278RMP

Auto store

Auto store is a function for storing up to 6 stations

that are automatically tuned in sequentially. If 6

receivable stations cannot be received, a previ-

ously stored station remains un-overwritten at

the memory position.

1. Press the

[

BAND

]

button and select the desired

band

(

FM or AM

(

MW/LW

))

2. Press and hold the

[

]

button for 2 seconds

or longer. The stations with good reception are

stored automatically to the preset channels.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

Preset scan

Preset scan receives the stations stored in preset

memory in order. This function is useful when

searching for a desired station in memory.

1. Press the

[

]

button.

2. When a desired station is tuned in, press the

[

]

button again to continue receiving that

station.

Note:

Be careful not to press and hold the

[

]

button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

Radio Operations

Recalling a preset station

A total of 24 preset positions

(

6-FM1, 6-FM2,

6-FM3, 6-AM

)

exists to store individual radio

stations in memory. Pressing the corresponding

[

DIRECT

]

button recalls the stored radio frequen

cy automatically.

1. Press the

[

BAND

]

button and select the desired

band

(

FM or AM

(

MW/LW

))

2. Press the corresponding

[

DIRECT

]

button to

recall the stored station.

∗ Press and hold one of the

[

DIRECT

]

buttons

for 2 seconds or longer to store that station into

preset memory.

RDS Operations

RDS

(

Radio Data System

)

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS

data.

This system can display the name of the broad-

cast station being received

(

)

and can auto

matically switch to the broadcast station with the

best reception as you move long distances

(

switching

)

Also, if a trafﬁc announcement or programme

type is broadcast from an RDS station, no matter

what mode you are in, this broadcast is received.

Additionally, if EON information is received, this

information enables automatic switching of other

preset stations on the same network and inter-

ruption of the station being received with trafﬁc

information from other stations

(

)

. This func

tion is not available in some areas.

When using the RDS function, always set the

radio to FM mode.

AF : Alternative Frequency

PS : Programme Service Name

PTY : Programme Type

EON : Enhanced Other Network

TP : Trafﬁc Programme

∗ RDS interrupt does not function during AM radio

reception.

∗ When set receives RDS signal, and can read PS

data, PS appears in the display.

AF function

The AF function switches to a different frequency

on the same network in order to maintain opti-

mum reception.

∗ The factory default setting is “ON”.

1. Press and hold the

[

ADJ

]

button for 1 second

or longer to switch to the RDS adjustment

selection display.

2. Press the

[

]

button to select “AF”.

3. Turn the

[

ROTARY

]

knob to select “ON” or

“OFF”.

ON:

“AF” in the display lights and AF function turns on.

OFF:

“AF” in the display goes off and AF function turns off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion DUB278RMP Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion DUB278RMP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info