580525
17
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
16
English
DUB278RMP
4. Press the
[
ADJ
]
button to return to the previous
mode.
If the reception of the current broadcast station
deteriorates,
SEARCHappears in the display
and the radio searches for the same programme
on another frequency.
REG
(
Regional programme
)
function
When the REG function is ON, the optimum re-
gional station can be received. When this func-
tion is OFF, if the regional station area switches
as you drive, a regional station for that region is
received.
The factory default setting is “OFF”.
Notes:
This function is disabled when a national station
such as BBC R2 is being received.
The REG function ON/OFF setting is valid when
the AF function is ON.
1. Press and hold the
[
ADJ
]
button for 1 second
or longer to switch to the RDS adjustment
selection display.
2. Press the
[
,
]
button to select “REG”.
3. Turn the
[
ROTARY
]
knob to select ON or
OFF”.
ON:
REGin the display lights and REG function turns
on.
OFF:
REG in the display goes off and REG function
turns off.
4. Press the
[
ADJ
]
button to return to the previous
mode.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
This function can be used when a regional broad-
cast of the same network is received.
2. Press any one of the
[
DIRECT
]
buttons to call
out the regional station.
3. If the reception condition of the called out sta-
tion is bad, press the
[
DIRECT
]
button of the
same number. The unit receives a local station
on the same network.
TA
(
Traffic Announcement
)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the Function mode so you can listen to it. Traffic
programme
(
TP
)
automatic tuning is also pos
-
sible.
This function can only be used when TPis lit in
the display. When
TPis lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
Setting the TA standby mode
If you press the
[
TA
]
button when only
TPis lit in
the display, “TP” and “TA” light in the display and
the unit is set into the TA standby mode until a
traffic announcement is broadcast. When a traffic
announcement broadcast starts, TRA INFOap-
pears in the display. If you press the
[
TA
]
button
while a traffic announcement broadcast is being
received, the traffic announcement broadcast re
-
ception is cancelled and the unit goes into the TA
standby mode.
Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the
[
TA
]
button. The TAin the display goes off and the
TA standby mode is cancelled.
If “TP” is not lit, pressing the
[
TA
]
button searches
for a TP station.
Searching for a TP station
When “TPis not lit, if you press the
[
TA
]
button,
TA in the display lights and the unit automati-
cally receives a TP station.
Note:
If a TP station is not received, the unit continues
the search operation. Pressing
[
TA
]
button again
goes off TAin the display and stops TP station
searching.
RDS Operations
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Clarion DUB278RMP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Clarion DUB278RMP

Clarion DUB278RMP Bedienungsanleitung - Deutsch - 36 seiten

Clarion DUB278RMP Bedienungsanleitung - Holländisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info