Bedienungsanleitung Clarion MAX678RVD (Seite 57 von 77) (Englisch)

580549

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

Digital Radio/DAB Operations

MAX678RVD

English

Owner’s manual

Storing a programme to preset

memory

1. Press the [BAND] button or touch the [Band]

key to select the desired band (M1, M2 or

M3).

2. Receive the programme you wish to store by

performing the seek tuning, etc.

3. Touch the [List] key.

4. Touch and hold the desired preset key for

more than 2 seconds to store the current

programme.

Information standby mode

When the Information programme selected in the

INFO SELECT screen of the DAB Option menu

starts, the unit switches to the selected

Information programme automatically.

• For details on Information Select, refer to the

section “Information select” below.

1. Keep pressing the [TA] button more than 1

second.

“INFO” is displayed on the screen, and this

unit enters to the Information standby mode

until information starts.

• If you press the [TA] button while the

Information programme is being received,

receiving programme is cancelled, and the

unit enters to the Information standby

mode.

2. To cancel the Information standby mode,

keep pressing the [TA] button again more

than 1 second.

Note:

• Only when the DAB tuner is connected, this can be

operated even in the RDS mode.

Information select

This function allows you to specify a type of

Information for the Information interrupt mode.

You can set any of the following 6 types of

Information:

TRAVEL, WARNING, NEWS, WEATHER ,

EVENT, and SPECIAL.

1. Touch the [Option] key, and then touch the []]

key of the INFO SELECT item.

The INFO SELECT screen is displayed.

2. Touch the [ON] or [OFF] key of the desired

Information item.

3. Touch the [Back] key to return to the previous

screen.

PTY

This function enables you to listen to the selected

programme type, regardless of the function

mode.

• DAB and RDS have the same PTY.

• You can select one PTY from DAB or RDS.

• PTY broadcast are not yet available in all

countries.

• In the information standby mode, INFO stations

have priority over PTY stations.

• In the TA standby mode, TP stations have

priority over PTY stations.

Dynamic Label Function

A dynamic label (hereinafter referred to as “DLS”)

is a text data associated with each DAB service.

This unit can display a DLS up to 128 characters

on the screen.

DLS display mode

Normally, 16 letters x 1 line are displayed on the

DAB mode screen.

1. Touch the []] key on the DAB mode screen to

display all DLS text.

2. To cancel the DLS mode and return to the

previous screen, touch the [Back] key.

If there is a DLS data in the reception service,

the DLS text is displayed in the text displaying

area.

DLS memory

Up to 6 DLSs, currently being received, can be

stored.

1. Touch the []] key on the DAB mode screen.

2. Touch and hold the desired preset [1] to [6]

key more than 2 seconds.

The DLS data currently being displayed is

stored.

DLS calling

1. To call the DLS stored in the DLS memory,

touch the desired preset [1] to [6] key.

The DLS data in the DLS memory is displayed

up to 128 characters.

2. To cancel the DLS mode and return to the

previous display, touch the [Back] key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion MAX678RVD Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info