Bedienungsanleitung Clarion MAX678RVD (Seite 58 von 77) (Englisch)

580549

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

MAX678RVD

English

Owner’s manual

NAVI Operations (NAX973HD/NAX963HD, etc.)

NAVI functions

Note:

• Hereafter in this section, the Navigation system will

be called as “NAVI”.

• When the Clarion NAVI NAX963HD is connected,

the following functions are available:

• Showing the NAVI display

• Operation by using the panel side buttons

• NAVI guidance voice interruption

• When the NAVI (NAX963HD) is being used…

• If the 5.1ch surround decoder (DVH943) is

connected, the voice interruptions of the

NAVI will not work.

• If the 5.1ch surround decoder (DVH943N) is

connected, the voice interruptions of the

NAVI will work.

• When a voice interrupt of the NAVI arises during 2-

ZONE ON, the sound of the MAIN zone is muted,

and the sound of the SUB zone is output normally.

When it arises during 2-ZONE OFF, the audio

signals to the 4ch speakers are attenuated, and

the voice from the navigation system is output from

the front two speakers.

• Since the Clarion NAVI (NAX963HD) is

automatically recognised, you can omit the below-

mentioned CONNECT setting.

Setting NAVI as external input

equipment

Perform this setting after connecting NAVI.

• The factory default setting is “NONE”.

1. Press the [ADJ] button, and touch the

[GENERAL] key.

2. Touch the []] key of the CONNECT item, and

touch the [RGB], [COMPOSITE], [OTHERS]

or [NONE] to set the function.

RGB:

Select when the Clarion NAVI (NAX943DV,

NAX9500E) is connected.

Control of it can be made only from the remote

control unit, and the NAVI voices are output

from the special speakers for the NAVI.

* Do NOT connect the NAX943DV or

NAX9500E to the CCD terminal of the main

unit; they can only be connected to the RGB

input terminal of the main unit via RGB cable.

COMPOSITE:

Select when a NAVI of the other manufacturer

is connected.

Control of it can be made only from the remote

control unit, and the NAVI voices are output

from the special speakers for the NAVI.

OTHERS:

Select for external devices other than a NAVI.

NONE:

Select when no external device is connected.

NAVI operation

Changes between the NAVI display and the

Audio/Visual (hereinafter, refered as “AV”)

display.

Note:

• The below-mentioned [NAVI] and [AV] keys are

available only when the Clarion NAVI

(NAX963HD) is connected.

When the other NAVI is connected, use the [MAP]

button to switch the screen mode.

● AV screen

When the image interruption from the NAVI

arises, the screen will be changed from the AV

screen to the NAVI screen. When the interruption

is finished, the screen will return to the previous

AV screen.

● NAVI screen

Audio operations made in the NAVI mode will be

indicated for about 2 seconds at the bottom of the

NAVI screen.

● Operations using the buttons

[VOICE] button

• The VOICE screen of the NAVI mode is

displayed.

• When in the AV mode, it is changed to the

NAVI mode, and the VOICE operation is

performed.

[MAP] button

• The MAP screen of the NAVI mode is

displayed.

• When in the AV mode, it is changed to the

NAVI mode.

[MAP] key

[AV] key

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion MAX678RVD Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info