Bedienungsanleitung Clarion NAX980HD (Seite 38 von 59) (Englisch, Französisch, Spanisch)

497686

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

Notes on the Voice Guidance

NAX980HD

English

• A U-turn may be required at a waypoint.

• The route calculation may not be completed in

the following cases:

• If there is no main road within a range of

approx. 5 km (3 miles) from the current

location.

• If there is no main road within a range of

approx. 5 km (3 miles) from the destination

(or waypoints).

• If the vehicle is too close to the destination.

In this case, a message to inform you about

this will be displayed.

•

If it is impossible to reach the destination or

waypoints because of traffic regulations, etc.

• If the map database does not contain the

area data of the selected locations.

• If only an extremely roundabout route is

available to reach the destination or

waypoints.

• When displaying a route, the following may

occur:

• Even if a route calculation is requested on a

main road, the start point of the suggested

route may not exactly match the current

vehicle location.

• If a route calculation is requested on a main

road, the end point of the suggested route

may not exactly match the destination.

• If a route calculation is requested on a main

road, the system may suggest a route

starting from another main road.

In this case, park the vehicle in a safe

location and reset the vehicle mark using

Setting menu, or continue driving until the

vehicle icon appears on a main road. If

either of these methods are not successful,

request a route calculation again.

• Ferry lines are stored in this system. Take

into consideration the travel time required

and operational condition before deciding

whether to use them or not.

• The current location or the traveling direction

may shift according to the traveling condition. It

is not a malfunction, and will return to a normal

display when keeping traveling for a while.

• Though the vehicle position may shift in places

other than the road such as in the parking lot,

etc., it is not a malfunction. It will return to a

normal display when traveling on an actual

road for a while.

• In the current location display, a representative

name of the place which is nearest to the

vehicle position in the map database is

displayed, it may be different from the actual

place name.

Notes on the Voice Guidance

• The voice guidance may not match the actual

roads or regulations. The cause of this can be

that the actual roads and the data in the map

database are different, or the vehicle speed.

• This navigation system will not issue neither

voice guidance nor turn by turn arrow for the

roads of which the traffic regulations and

geometries of the roads have not been verified

by the Map D/B supplier, because the system

cannot generate the route guidance for these

roads. Be sure to follow the actual traffic

circumstances and regulations.

• If the content of the voice guidance does not

match the actual roads or regulations, follow

the information acquired from the actual traffic

or road signs.

• The voice guidance is activated only for

intersections with certain conditions. There

may be cases that the vehicle has to turn, but

the voice guidance is not activated.

• The content of the voice guidance may vary,

depending on the direction of the turn and the

type of the intersection.

• The voice guidance timing will vary depending

on the situation.

• The voice guidance is not available when the

voice guidance function is not set to ON.

Moreover, even when the voice guidance

function is set to ON, if the voice guidance

volume is set to a very low value, the voice

guidance may not be audible. ➜ “Volume/

Voice Settings” (P. 47)

• The voice guidance will start when the vehicle

enters the suggested route. Before entering the

route, refer to the map screen for directions.

• When the vehicle approaches a waypoint, the

voice guidance will say “You have arrived at

waypoint <1 to 5>”. The voice guidance will

switch to the next route section. Please refer to

the map screen for directions until the next

voice guidance is started.

• When the vehicle approaches a destination,

the voice guidance will say “You have arrived

at the destination”. For the remainder of the

way, please refer to the map screen for

directions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion NAX980HD Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info