Bedienungsanleitung Clarion nx509e (Seite 39 von 69) (Englisch, Französisch, Spanisch)

162957

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

NX509

English

Owner’s manual

Messages displayed during

reception

The following messages are displayed when the

satellite radio cannot be received normally.

● Sirius:

• When a channel is being tuned in or no signal

is received: “ACQUIRING SIGNAL”

• A channel without a broadcast has been

selected: “INVALID CHANNEL”

• A channel not covered by your contract: “CALL

888-539-SIRIUS TO SUBSCRIBE”

• When the tuner is turned on the first time or

after a reset: “UPDATING CHANNELS”

• When your contract is expired:

“SUBSCRIPTION UPDATED”

• When the Sirius antenna is not connected

correctly : “ANTENNA ERROR”

● XM:

• When a channel is being tuned in (no signal is

yet received): “LOADING”

• A channel without a broadcast has been

selected: “CHANNEL NOT AVAILABLE”

• A channel not covered by your contract:

“CHANNEL NOT AUTHORIZED”

• When a channel is out of air time: “CHANNEL

OFF AIR”

• When no signal is received: “NO SIGNAL”

• When the XM antenna is not connected

correctly : “CHECK ANTENNA”

Note:

• The messages may vary depending on the XM

tuners connected to this unit.

❏ Selecting a band

1. Touch the [Band] key to select a band.

This changes the reception band as follows:

• Sirius: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...

•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...

❏ Confirming your Radio ID

● Sirius

1. Touch the [Options] key to display the

Options screen.

Your Sirius ID (12-digit number) will be

displayed.

2. To return to the previous screen, touch the

[Back] key.

● XM

1. Touch the [Direct] key to display the Key Pad

screen.

2. Touch the [0] key, then touch the [ENT] key.

Receiving the Channel “0” will display your

Radio ID (8-digit number).

❏ Tuning in a station

Only channels that can be received are selected.

Channels without broadcasts and channels not

covered by the contract will be skipped.

1. Touch the [{ (Channel)] or [} (Channel)]

key.

The system will tune to the previous or next

available channel.

• Holding the key continues to seek channels.

❏ Selecting a station with the

channel number

1. Touch the [Direct] key to display the Key Pad

screen.

2. Enter the channel number of your desired

station by touching the [0] to [9] keys.

• If you enter a wrong number, you can

cancel it by touching the [BS] key.

• To return to the previous screen, touch the

[Back] key.

3. Touch the [ENT] key.

The radio channel you entered will be tuned.

❏ Displaying the channel name

and other information

1. Touch the [Preset Info] key when the Preset

keys are displayed.

The channel name, category name, and other

information are displayed.

• When the information displayed is longer

than 16 characters, touching the text scrolls

the entire text.

2. To return to the Preset Key screen, touch the

[Preset Info] key again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion nx509e Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion nx509e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info