Bedienungsanleitung Clarion nx509e (Seite 40 von 69) (Englisch, Französisch, Spanisch)

162957

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

NX509

English

Owner’s manual

❏ Recalling a preset station

A total of 18 Sirius stations and 18 XM stations

can be stored (Sirius: 6-SR1, 6-SR2, and 6-SR3;

XM: 6-XM1, 6-XM2, and 6-XM3). This allows you

to store your favorite stations in memory for later

recall.

1. Display the Preset Key screen by touching the

[Preset Info] key.

2. Select the desired band by touching the

[Band] key.

3. Touch the corresponding Preset key to recall

the stored station.

The system will tune to the specified station.

• Touching and holding the desired Preset

key for more than 2 seconds stores the

current station into the preset memory.

❏ Manual memory

1. Display the Preset Key screen by touching the

[Preset Info] key.

2. Select the desired band by touching the

[Band] key.

3. Tune to the station you wish to store.

4. Touch and hold the desired Preset key you

wish to store to for more than 2 seconds.

A beep sounds and the current station is

stored into the preset memory.

❏ Receiving stations selected by

category

Satellite Radio allows you to select broadcast

channel category (contents).

1. Touch the [Category] key to display the

Category List screen.

2. Touch the desired Category item key to select

the category.

The system will tune in to the lowest available

channel of the specified category.

• Touch the [{] or [}] key to scroll the

category list.

3. Touch the [{ (C-Seek)] or [} (C-Seek)] key

to select a station.

The system will tune to the previous or next

available channel that meets the specified

category.

4. To return to the previous screen, touch the

[Back] key.

Note:

• Touching the [Back] key within 1 second after

selecting the category cancels the category

selection and returns to the channel previously

received.

• If you do not touch the screen for 7 seconds, the

display will return to the previous screen.

❏ Category Scan function

In a category scan, broadcast channels in the

same category as the current channel are

selected about every 10 seconds. During

scanning channels are performed, the display

mode cannot be switched.

1. Touch the [Category] key to display the

Category List screen.

2. Touch the desired Category item key to select

the category.

• Touch the [{] or [}] key to scroll the

category list.

3. Touch the [CAT Scan] key.

The system will start the category scan from

the lowest available channel.

4. Touch the [CAT Scan] key again to tune to

the channel currently received.

The category scan will be terminated.

Note:

• When you touch the [Back] key during the

category scan to return to the previous screen, the

category scan will continue.

• The category scan can be also performed by

touching the [CAT Scan] key on the Sirius/XM

mode screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion nx509e Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion nx509e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info