Bedienungsanleitung Clarion VRX878RVD (Seite 25 von 79) (Englisch)

497692

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

Basic Operations

VRX878RVD

English

Owner’s manual

Setting the BEEP

The sound heard when you make operations is

called “beep”. The unit can be set up so that it

does not produce this beep sound.

• The factory default setting is “ON”.

Setting the Blink LED

You can set the unit to blink the LED indication

when the DCP (Detachable Control Panel) is

removed.

Performing the system check

Changing the output speaker for the

mobile phone

• The factory default setting is “RIGHT”.

• To output the telephone calls, set the following

TEL SWITCH item to “ON”.

Note:

• During mobile phone interrupts, setting this

function is disabled.

Mobile phone interrupt setting

When you connect your mobile phone to this unit

using a separately sold cable, you can listen to

your telephone calls on your car speakers.

• The factory default setting is “OFF”.

Note:

• This function is not compatible with all mobile

telephones. Contact your local authorized Clarion

dealer for information on proper installation and

compatibility.

• When you set this function to “OFF”, disconnect

the mobile phone from the cable or turn off the

power of the mobile phone.

Setting the voice input line for the

mobile phone

When you connect your mobile phone to this unit,

select the connection method of the adaptor box.

• The factory default setting is “CeNET”.

Note:

• When setting to “AUX”, the VISUAL mode is

altered to the ACCESSORY mode.

3-1. Touch the [ON] or [OFF] key of the BEEP

item to turn the function on or off.

3-1. Touch the [ON] or [OFF] key of the BLINK

LED item to turn the function on or off (The

factory default setting is “OFF”).

3-1. Touch the []] key of the SYSTEM CHECK

item.

The available operation mode is listed in

white letters.

3-2. Touch [Check] key at the top right of the

screen to perform the system check

manually.

The system will be restarted after

performing the system check.

3-1. Touch the []] key to display the next menu

screen.

3-2. Touch the [LEFT] or [RIGHT] key of the TEL

SP item to set to “LEFT” or “RIGHT”.

LEFT:

Telephone calls are heard from the left

speaker connected to this unit.

RIGHT:

Telephone calls are heard from the right

speaker connected to this unit.

3-1. Touch the []] key to display the next menu

screen.

3-2. Touch the [ON], [OFF] or [MUTE] key of the

TEL SWITCH item to set to “ON”, “OFF” or

“MUTE”.

ON:

You can listen to your telephone calls from

the speakers connected to this unit.

* When listening to your calls on your car

speakers, you can adjust the volume using

the [E]/[e] buttons.

OFF:

This unit continues normal operation even

when you use the mobile phone.

MUTE:

The sound from this unit is muted during

telephone calls.

3-1. Touch the [C] key to display the next menu

screen.

3-2. Touch the [CeNET] or [AUX] key of the TEL

SELECT item to set to “CeNET” or “AUX”.

CeNET:

Selects when the adaptor box is connected

via the CeNET.

AUX:

Selects when the adaptor box is connected

to Audio (left/right) of the Visual input

terminal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion VRX878RVD Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion VRX878RVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info