Bedienungsanleitung Clarion VRX878RVD (Seite 27 von 79) (Englisch)

497692

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

Basic Operations

VRX878RVD

English

Owner’s manual

2-ZONE Function

About the 2-ZONE function

The 2-ZONE function is a function that outputs

separate sounds/images from the MAIN zone

and SUB zone (such as the optional rear monitor)

by simultaneously operating two sources in the

one centre unit. Thereby, plural listeners are

allowed to enjoy separate audio/visual sources.

The 2-ZONE function allows internal sources

(TUNER, DVD, VISUAL, iPod) and external

sources via CeNET connection (CD changer, TV,

etc.) to be played on MAIN zone and SUB zone.

Controlling sources of MAIN zone and SUB zone

can be made from the main unit and from the

remote control unit.

The source sounds of the MAIN zone are played

back from the speakers of the vehicle side, and

those of the SUB zone are from the headphone

systems (WH143H/WH253H).

Sound volume control on the SUB zone is

performed by the headphone system (WH143H/

WH253H).

Note:

• The TUNER mode cannot be specified for the SUB

zone.

• The 2-ZONE function is disabled when the

following equipments are connected:

• 5.1 channel surround decoder (DVH943N)

• DAB tuner (DAH923)

• The steering wheel remote control operations work

upon the MAIN zone even when the SUB zone is

selected.

• When a voice interrupt of the navigation system

arises during 2-ZONE ON, the sound of the MAIN

zone is muted, and the sound of the SUB zone is

output normally.

When it arises during 2-ZONE OFF, the audio

signals to the 4ch speakers are attenuated, and

the voice from the navigation system is output from

the front two speakers.

• You cannot operate the 2-ZONE function during

the voice interrupt of the navigation system.

• If a mobile phone interrupt arises when an external

equipment is specified for the SUB zone, the 2-

ZONE function is automatically turned off, and it

does not resume to the 2-ZONE ON status even

when the interruption is finished.

• You cannot switch the MAIN and SUB zone when

the following screen is displayed:

• Navigation mode screen

• Front monitor locked screen

• CCD camera screen

Setting the 2-ZONE function

• The factory default setting is “OFF”.

* The function can also be switched by using the

remote control unit. See the chapter “Remote

Control” (page 14) for details.

1. Press the [SRC] button to display the Source

menu.

2. Touch and hold the [2 ZONE] key more than

1 second to turn the 2-ZONE function on.

The 2-ZONE indication is displayed at the top

left of the screen.

3. Touch the [SUB] key on the Source menu to

switch to the SUB zone.

You can control the operation modes for the

SUB zone.

4. Press the [SRC] button, and touch the [MAIN]

key to return to the MAIN zone.

5. To turn the 2-ZONE function off, touch the [2

ZONE] key on the Source menu.

Displayed when 2-ZONE function is

turned on.

• [MAIN]:MAIN zone is selected.

• [SUB]:SUB zone is selected.

2-ZONE indication

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion VRX878RVD Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion VRX878RVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info