Bedienungsanleitung Clarion WXZ468RMP (Seite 14 von 41) (Englisch)

63180

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

14 WXZ468RMP

280-8262-00

English

Radio Operations

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In the quick

tuning mode, you can quickly tune the desired

frequency.

1. Press the [BAND] button and select the de-

sired band (FM or AM (MW/LW)).

∗ If “MANU” is not lit in the display, press and

hold the [BAND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

2. Tune into a station.

●Quick tuning:

Turn the [SEARCH] knob for 1 second or

longer to tune in a station.

●Step tuning:

Turn the [SEARCH] knob to manually tune in

a station.

Recalling a preset station

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio sta-

tions in memory. Pressing the corresponding

[DIRECT] button recalls the stored radio fre-

quency automatically.

1. Press the [BAND] button and select the de-

sired band (FM or AM (MW/LW)).

2. Press the corresponding [DIRECT] button to

recall the stored station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store that station

into preset memory.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

Listening to the radio

1. Turn the [SOURCE] knob and select the

radio mode. The frequency or PS appears in

the display.

∗ PS: Programme service name

2. Press the [BAND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the follow-

ing order:

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜

FM1...

3. Turn the [SEARCH] knob to tune in the de-

sired station.

Tuning

There are 3 types of tuning modes available, seek,

manual and preset tuning.

Seek tuning

1. Press the [BAND] button and select the de-

sired band (FM or AM (MW/LW)).

2. Tune into a station.

∗ If “MANU” is lit in the display, press and hold

the [BAND] button for 1 second or longer.

“MANU” in the display goes off and seek tun-

ing is now available.

∗ If “TA” is lit in the display, TP stations are auto-

matically sought.

●DX SEEK

Turn the [SEARCH] knob to automatically seek

a station.

When the knob is turned right, the station is

sought in the direction of higher frequencies; if

the knob is turned left, the station is sought in

the direction of lower frequencies.

∗ When seek tuning starts, “DX SEEK” appears in

the display.

●LOCAL SEEK

If you turn the [SEARCH] knob for 1 second or

longer, local seek tuning is carried out. Broad-

cast stations with good reception sensitivity are

selected.

∗ When local seeking starts, “LO SEEK” appears in

the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion WXZ468RMP Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion WXZ468RMP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info