Bedienungsanleitung Clarion WXZ468RMP (Seite 15 von 41) (Englisch)

63180

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

280-8262-00

WXZ468RMP 15

English

Auto store

Auto store is a function for storing up to 6 sta-

tions that are automatically tuned in sequen-

tially. If 6 receivable stations cannot be received,

a previously stored station remains

unoverwritten at the memory position.

1. Press the [BAND] button and select the de-

sired band (FM or AM (MW/LW)).

2. Press and hold the [SEARCH] knob for 2

seconds or longer. The stations with good re-

ception are stored automatically to the preset

channels.

Preset scan

Preset scan receives the stations stored in pre-

set memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [SEARCH] knob.

2. When a desired station is tuned in, press the

[SEARCH] knob again to continue receiving

that station.

Note:

• Be careful not to press and hold the [SEARCH]

knob for 2 seconds or longer, otherwise the auto

store function is engaged and the unit starts stor-

ing stations.

Radio Operations

RDS (Radio Data System)

This unit has a built-in RDS decoder system that

supports broadcast stations transmitting RDS data.

This system can display the name of the broadcast

station being received (PS) and can automatically

switch to the broadcast station with the best recep-

tion as you move long distances (AF switching).

Also, if a traffic announcement or programme

type is broadcast from an RDS station, no matter

what mode you are in, this broadcast is received.

Additionally, if EON information is received, this

information enables automatic switching of other

preset stations on the same network and inter-

ruption of the station being received with traffic

information from other stations (TP). This func-

tion is not available in some areas.

When using the RDS function, always set the

radio to FM mode.

• AF : Alternative Frequency

• PS : Programme Service Name

• PTY : Programme Type

• EON : Enhanced Other Network

• TP : Traffic Programme

∗ RDS interrupt does not function during AM radio

reception.

∗ When set receives RDS signal, and can read PS

data, PS appears in the display.

Switching the display

This allows switching of the indication during

RDS reception.

1. Each time you press the [TITLE] button, the

display changes in the following order:

PS-NAME PTY

AF function

The AF function switches to a different fre-

quency on the same network in order to main-

tain optimum reception.

∗ The factory default setting is “ON”.

1. Press and hold the [ADJ] button for 1 second

or longer to switch to the RDS mode.

2. Turn the [SEARCH] knob to select “AF”.

3. Turn the [A-MODE] knob to select “ON” or

“OFF”.

● ON:

“AF” is lit in the display and the AF function

turns on.

● OFF:

“AF” goes off in the display and the AF func-

tion turns off.

RDS Operations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Clarion WXZ468RMP Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Clarion WXZ468RMP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info